ZLQ16E2-SWP10F-DYO3V-N IP65 16mm metal push button switch with Orange LED

Series:ZLQ12 series

Description:

Type:                                 ZLQ16E2-SWP10F-DYO3V-N

Construction category:  D type
Operation method:         Push button switch
Configuration:                 Single-Pole Single -Throw (SPST)
Terminal form:                Solder Terminal
Protection:                       IP65
Ratings:                           1A 36VDC                       
Withstand voltage:        1000VAC,1Min

Contact Now

  • Applications
  • Technical parameters
  • Remarks

Enormous remote
controller and portable remote controller

Instrumentation
Medical equipment

Telecommunications and networking equipment
Computers & peripherals
Instrumentation and controls

Industrial electronic equipment
Industrial remote controller
Medical Equipment
Communication
Outdoor Controls

Public building, Home security, Business building, Industrial equipment…etc.

3. DETAIL SPECIFICATIONS:
Type:ZLQ16   
Construction category:  D
Operation method:    Push button switch
Configuration:        Single-Pole Single -Throw (SPST)
Terminal form:Solder Terminal
Protection:IP65
Ratings   1A 36VDC                      
Withstand voltage  1000VAC,1Min
3.1  General
3.1.1 Application   This specification is applied to KAN-J4 Power Switch used for electronic equipment.
3.1.2 Operating temperature range       -20℃ to +55℃                                
3.1.3 Test conditions  Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
Ambient temperature:15~35℃
Relative humidity:45~85%
Air pressure: 86~106kPa (860~1060 mbar)
Should any doubt arise in judgment. tests shall be conducted at the following conditions.
Ambient temperature:20±2℃
Relative humidity:60~70%
Air pressure: 86~106kPa (860~1060 mbar)
3.2Appearance construction and dimensions
3.2.1Appearance  Switch shall have good finishing, and no rust crack or plating failures.
3.2.2Construction and dimensions Refer to individual product drawing

3.3. Electrical Characteristics

NO.

Items

Test conditions

3.3.1

Contact resistance

The contact resistance should be 50mΩ(Max). 

3.3.2

Insulation resistance

It is measured with 500V DC 1minute should be 1000MΩ(Min).

3.3.3

Dielectric strength

AC 1000V,1min.(before endurance test)

 AC 2000V,1min.(after endurance test)

3.4 Mechanical Characteristics

Item

Description

Test Conditions

1

Operating Force

1.5~2.5N

2

Operating Life 

The mechanical life all of 50 000 cycles

3

Contact Spacing

Min. 3.0mm (IEC61058)

3.5Durability

 NO.

Item

Test condition

Criteria

3.5.1

Endurance

(According to

 UL61058)

1A 36VDC
Switch shall be
operated according
to following sequence
(Test1~Test2)

 

Voltage

Current

Power factor

Operation rate

Number of operation

Test1

36VDC

1A 

0.75-0.8

6-10

cycles/min

50cycles

Test2

36VDC

1A 

0.75-0.8

6-10

cycles/min

6000cycles

Voltage proof(Cut-off current:0.5mA)

1A 36VDC

Switch shall be operated 50,000 cycles at 15-20 cycles/min.

Test voltages shall be applied for 1 min


Insulation resistance(item 4.2):
50MΩ MIN
Voltage proof:
Terminal and ground:1000VAC
No dielectric breakdown shall occur.
Operating characteristic (item 5.1):
Operating characteristic variety
Within ±20% of specifiedvalue .
6000 cycles temperature rise:45℃MAX;
10,000 cycles temperature rise:55℃ MAX;

No abnormalities shall be recognized in appearance and construction

3.5.2

Endurance

(According to EN61058-1

/IEC61058-1)

1A 36VDC

Switch shall be operated 50,000 cycles at 15~20 cycles/min

Voltage proof(Cut-off current:0.5mA)

Test voltages shall be applied for 1 min.

Insulation resistance(item 4.2):
50MΩ MIN
Voltage proof:
Terminal and terminal:750VAC
Terminal and ground:1500VAC

No dielectric breakdown shall occur.
Operating characteristic (item 5.1):
Operating characteristic variety
Within ±20% of specifiedvalue .
Temperature rise:55℃ MAX
No abnormalities shall be recognized in appearance and construction


3.6. SOLDERING
Solder ability and Resistance to sold heat according to IEC 68-2-20


4. DRAWING & DIMENSION:

SAFETY APPROVAL & RATING:

Approved Rating

Mark

Reference No.

 

UL&CUL

 

 

VDE

 

 

CQC

 

 

 PARTS LIST:

NO.

quantity

Items

Material

1

1

terminal

Brass sliver plated

2

1

Bushing

SUS304

3

 1

Button base

PC/Stainless Steel

4

1

Contact

Ag ally

5

1

actuator

PC/Stainless Steel

Note: Returned plastic should not exceed 20%.

return