T18S-SWC-Y-O Slide Switch 1P2T 3Pins 2Way for Household Electric Appliances

Series:T18S series

Description:

Type: T18S-SWC-Y-O

Operation method: Slide Action

Function: 1P2T 

Comply with: ■IP40  □IP65  □IP67  □IP68

Contact Now

  • Applications
  • Technical parameters
  • Remarks

Widely used in home appliance, electronic equipment, automatic machine,
communication equipment, car electron, apparatus and instrument, electric motion tool etc.

Rice cooker
Slow cooker

Baby chair
CNC machine tools
Power generator
Test equipment
Elevator
Power tools
Air conditioner

Bathroom products
Vacuum cleaner
Kitchen products
Pass-through machine


1.DETAIL SPECIFICATIONS

Type: T18S-SWC-Y-O

Operation method: Slide Action

Function: 1P2T 

Comply with: ■IP40  □IP65  □IP67  □IP68


1.1Operating temperature range         -10℃ + 50℃

1.2Test conditions                        

Unless other specified. The atmospheric conditions for making measurements and tests are as follows:

Ambient temperature:                             5~35℃

Relative humidity:                                45~85%

Air pressure:                       86~106kPa (860~1060 mbar)

Should any doubt arise in judgment. tests shall be conducted at the following conditions.

Ambient temperature:                             20±2℃

Relative humidity:                                60~70%

Air pressure:                      86~106kPa (860~1060 mbar)

1.3.APPEARANCE CONSTRUCTION AND DIMENSION  

1.3.1 Appearance       

      Switch shall have good finishing, and no rust crack or plating failures.

1.3.2 Construction and dimensions    

     Refer to individual product drawing.

1.4.ELECTRICAL SPECIFICATION

NO.

Items

Test Condition

Criteria

1.4.1

Contact Resistance

Shall be measured at 1KHz SMALL CURRENT(100 mA OR LESS) by voltage drop method after some operations without load.

Applied position: Between terminal and terminal


100mΩ MAX

1.4.2

Insulation Resistance

Test voltage: 100VDC, measured after 60 ±5s

Applied position:

1)Between terminal and terminal

2)Between terminal and ground


100MΩ MIN

1.5.ENVIRONMENT RESISTANCE 

NO.

Item

Test Condition

Criteria

1.5.1

Cold

After testing at -25±3℃ for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed.


Contact resistance(item 4.1):

500mΩ MAX

Insulation resistance (item 4.2):

50MΩ MIN

Voltage proof: (item 4.3)

No dielectric breakdown shall occur.


1.5.2

High Temperature

After testing at 85±2℃ for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h.

1.5.3

Steady 

Damp-heat

After testing at 40±2℃ and 90-95%RH for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed.


1.5.4

Change of

temperature


After 5 cycles of following conditions the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed.


1.5.5

Salt Mist

he switch  shall be checked after following test:

1)  Temperature: 35℃±2℃

2)  Salt solution : 5±1%(solids by mass)

1) Time: 24±1 hour

After testsalt deposit shall be removed by running water.


Operating characteristic (item 5.1):

Operating

characteristic variety Within ±10% of specified value .

No abnormalities shall be recognized in appearance and construction.

 


1.6.WELDING PERFORMANCE 

 

1.6.1

 

Solder ability

Switch test under such conditions and inspect after. 

1Variable temperature range :235±5℃

2Dip time:3±0.5s

 

The area of dip tin should 

capture the 95% 

impregnated area

 

1.6.2

 

Resistance 

to soldering 

heat

 

The switch will be inspect under such conditions below

        Temperature and impregnated time

Trial measure

temperature(

Time(s

Slot welding method

260±5

5±1

Soldering method

350±5

3±0.5

 

 

 

All of the appearance, 

motor functions,

 electrical properties 

are no abnormal. 

1.7.MECHANICAL CHARACTERISTICS

NO.

Item

Test Condition

Criteria

 

1.7.1

 

Operration  Force


 

Lateral push


 

Push force:

350gf±100gf


 

1.7.2

 

Travel to Closure


In the horizontal direction switch handle

opration,with an equal to 2 times the thrust of the switch fromone position to the next gear, moving distance measuring handle.


 


2mm±0.2mm


1.7.3

Stem Strength

And along the running direcition at apex handle (500g) on the strength test, time is 30 seconds.

 

2. DURABILITY

NO.

Item

Test Condition

Criteria

2.7.1

Life Test

An actuator shall be with a thrust of no great than 1 times switch power to 10,000 cycles.

At a speed of 30 cycles for 1 minutes.

1)Contact resistance(item 4.1):

200mΩ MAX

1) Life time:

2) 10,000 cycles

 

2.7.2 

Stem Strength

And along the running direcition at apex handle (500g) on the strength test, time is 30 seconds.

 

3. DRAWING & DIMENSION: 

 

PACKING

Packing material:

Plastic bag

 Packing number:

200 pieces per bag
 3 inner cartons per shipping carton
 Each shipping carton 1000 pieces

Weight:

Gross Weight:   24kg

 Net Weight  :   21kg

Size:

550 x 380 x 260 CM

return