T8013-SWTNCQ-S20 2Ways 3 Pins Metal ON-ON Rocker Arms Toggle Switch

Series:T8013-SWTNCQ-S20

Description:

DETAIL SPECIFICATIONS:

Type:     T8013-SWTNCQ-S20

Rating:    5A@125 VAC or28VDC (Q contact)

Function: SPDT 

Terminal form: Solder Terminal

Mounting: Whole embedding

Protection: Comply with  IP40

Contact Now

  • Applications
  • Technical parameters
  • Remarks

1.Digital Products: digital camera, digital video and so on;   

2.Remote Control: the remote control of automobile domestic security products;   

3.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;  
                                             
4.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ,refrigerator,washer;air-conditioning and so on;   
                                                                              
5.Security Products: visual interphone, monitor and so on;   
                      
6.Toys: electric toys and so on;   

7.Computer Products: PC camera and so on;   

8.Exercises Machines: treadmills, massage armchair and so on;                                                                    

9.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
      
10.Others:  laser pen ,Pointer,Wireless mouse remote control pen,Laser projection pen,page turner,electronic pen;MousePen;overhead projector and so on;

11.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders,automotive sets, etc.

12.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine,  Music Instrument, etc.

1. DETAIL SPECIFICATIONS:

Type:     T8013-SWTNCQ-S20

Rating:    5A@125 VAC or28VDC (Q contact)

Function: SPDT

1.1 OPERATING CHARACTERISTICS

NO.

ITEM

TEST CONDITIONS

PERFORMANCE

1.1.1

Operating Force

The test point is 3mm away from the rubber handle. After three times, the test is carried out.

10N max

1.1.2

Terminal Strength

In the front row of feet, any square type plus (500gf) strength test will take 15 seconds.

There are no cracks, loosening and other abnormalities in the terminals to meet the mechanical and electrical properties.

1.1.3

Shank strength

The force of 1Kgf is applied at the front of the handle, and the displacement should be fixed along the direction of the mark.

There is no serious deformation of the handle, and it can work normally.

Actuating Force:

The force required to move the actuator from the free to the operation position

 

1.2 GENERAL CHARACTERISTICS

1.2.1 Application: This specification is applied to T8013 Toggle Switch used for electronic equipment.

1.2.2 Operating temperature range:-30℃~+85℃

1.2.3 Test conditions : Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows  

Ambient temperature:                      15~35℃

Relative humidity:                           45~85%

Air pressure:                                   86~106kPa (860~1060 mbar)

1.3 APPEARANCE, STRUCTURE AND DIMENSION

1.3.1 Appearance :Switch shall have good finishing, and no rust crack or plating failures.

1.3.2 Construction and dimensions: Refer to individual product drawing.

1.4. Electrical specifications

NO.

ITEM

TEST CONDITIONS

PERFORMANCE

1.4.1

Contact

resistance 

 

The 2-4VDC is tested under tiny current (below 100mA), silver plated or gold plated.

10mΩ MAX

1.4.2

Insulation

resistance

 

Input 500V DC voltage for 1 minutes, test according to the following contact mode:

(1)Between the terminal.

(2)Between the terminal and the outer shell.

1000MΩ MIN

1.4.3

Pressure resistance

Measurement of AC 1500V (50-60 Hz) between open contacts and poles

Measurement of AC 3000V (50~60Hz) between terminal and grounding

Fixed time: 1 minute each

 

No abnormality, such as insulation damage

1.5 Endurance

NO.

ITEM

TEST CONDITIONS

PERFORMANCE

1.5.1

Operation Life

Measurements shall be made following the test set forth below:

3A,250VAC resistive load

‚Rate of Operation:6~8cycles/minute

ƒCycle of Operation:6000cycles

 

 

 

 

 

As show in item 3.4

 

 

1.6 ENVIRONMENT RESISTANCE

NO.

ITEM

TEST CONDITIONS

PERFORMANCE

1.6.1

Resistance Low Temperature

Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before measurements are made
Temperature:-30±3°C

‚Time:48 hours

As show in item 2~6

1.6.2

Resistance high Temperature

Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before measurements are made
Temperature:85±3°C

‚Time:48 hours

 

1.6.3

Resistance Humidity

Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before measurements are made
Temperature:40±2°C

‚Relative Humidity:90-95%

ƒTime:48 hours

1.7 SAFEKEEPING METHOD:

(1)If the product is not used immediately, it should be kept at normal temperature without direct sunlight and corrosive gases.

In the environment. But we recommend that we use it as soon as 6 months.

(2)Put the finished products in plastic bags and seal them in the same environment as soon as possible, and use them as soon as possible. Do not overlay excess when saved in order to prevent the pressure from breaking.

(3)Do not overlay excess when saved in order to prevent the pressure from breaking.

2. DRAWING & DIMENSION:  

 

3.CIRCUIT DIAGRAM 

  

PART LIST:

No.

Name

Material

1

CACE

diallyl phthalate(DAP)(UL94V-0)

2

ACTUATOR

Copper alloy, chrome plated

3

BUSHING

Copper alloy, nickel plated

4

HOUSING

Stainless Steel

5

SWITCH SUPPORT

Copper alloy, tin plated

6

END CONTACTS

Copper alloy, silver plated(Q contact material)

7

CENTER CONTACTS & ALL TERMINALS

Copper alloy, silver plated(Q contact material)

8

TERMINAL SEAL

Epoxy

9 Nut copper alloy , nickel plated
10 Lock washer Steel
11 Locking Ring cold-rolled steel,nickel plated

 

 

PACKING:

1

Packing material:

Plastic bag

Double-layers paper carton

2

Packing number:

X pieces per box X inner cartons per shipping carton Each shipping carton X pieces

3

Weight:

Gross Weight : xx kg

Net Weight : xx kg

4

Size:

X x Xx X CM

return