SS06A-A-230G2.0-silde switch 1P2T
Series:SS06A-A-230G2.0
Type: SS06A-A-230G2.0
RATING: DC 12V 100mA
FUNCTION:1P2T
- Applications
- Technical parameters
- Remarks
-
1.Digital Products: digital camera, digital video and so on;
2.Remote Control: the remote control of automobile domestic security products;
3.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;
4.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ，refrigerator，washer;air-conditioning and so on;
5.Security Products: visual interphone, monitor and so on;
6.Toys: electric toys and so on;
7.Computer Products: PC camera and so on;
8.Exercises Machines: treadmills, massage armchair and so on;
9.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
10.Others: laser pen ，Pointer，Wireless mouse remote control pen，Laser projection pen，page turner，electronic pen；MousePen；overhead projector and so on;
11.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders，automotive sets, etc.
12.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine, Music Instrument, etc.
1.1 OPERATING CHARACTERISTICS
NO.
ITEM
TEST CONDITIONS
PERFORMANCE
1.1.1
OPERATING FORCE
LATERAL PUSH
230gf±70gf
1.1.2
TERMINAL STRENGTH
A STATIC LOAD OF 300 gf SHALL BE APPLIED TO THE TERMINAL FOR 15 SEC. IN ANY DIRECTION.
THERE SHALL BE NO DAMAGE TO
THE TERMINAL SUCH AS CRACKS, LOOSENESS OR PLAY.ELECTRICAL AND MECHANICAL CHARACTERISTICS SHALL BE SATISFIED.
Actuating Force:The force required to move the actuator from the free to the operation position
1.2 GENERAL CHARACTERISTICS
1.2.1 Application:This specification is applied to SK12E Slide Switch used for electronic equipment.
1.2.2 Operating temperature range:0℃ to 85℃
1.2.3 Test conditions : Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
Ambient temperature: 15~35℃
Relative humidity: 45~85%
Air pressure: 86~106kPa (860~1060 mbar)
1.3 APPEARANCE, STRUCTURE AND DIMENSION
1.3.1 Appearance :Switch shall have good finishing, and no rust crack or plating failures.
1.3.2 Construction and dimensions:Refer to individual product drawing.
1.4. Electrical specifications
NO.
ITEM
TEST CONDITIONS
PERFORMANCE
1.4.1
CONTACT
RESISTANCE
MEASURED AT 1 KHz SMALL CURRENT(100 mA OR LESS)
100mΩ MAX
1.4.2
INSULATION
RESISTANCE
APPLY A VOLTAGE OF 500V DC SHALL BE APPLIED FOR 1 MIN AFTER
WHICH MEASUREMENT BE MADE:
(1) BETWEEN TERMINAL.
(2) BETWEEN INDIVIDUAL TERMINAL AND FRAME.
50MΩ MIN
1.4.3
DIELECTRIC
STRENGTH
AC 500V rms(50~60Hz) FOR 1 MIN TRIP CURRENT: 0.5 mA
(1) BETWEEN TERMINAL.
(2) BETWEEN INDIVIDUAL TERMINAL AND FRAME.
WITHOUT DAMAGE TO PARTS ARCING OR
BREAKDOWN ETC.
1.5. MECHANICAL CHARACTERISTICS
NO.
ITEM
TEST CONDITIONS
PERFORMANCE
1.5.1
TRAVEL
IN THE HORIZONTAL DIRECTION SWITCH HANDLE OPRATION,WITH AN EQUAL TO 1TIMES THE THRUST OF THE SWITSH FORM ONE POSITION TO THE NEXT GEAR, MOVING DISTANCE MEASURING HANDLE.
2.0mm±0.2mm
1.5.2
STEM STRENGTH
AND ALONG THE RUNNING DIRECTION AT APEX HANDLE(4N)ON THESTRENGTH TEST,TIME IS 30 SECONDS.
THE LEVER SHALL HAVE NO
SERIOUS DEFORMATION AND
FUNCTION IS NORMALLY.
1.6.DURABILITY：
NO.
ITEM
TEST CONDITIONS
PERFORMANCE
1.6.1
LIFE TEST
AN ACTUATOR SHALL BE WITH A THRUST OF NO GREAT THAN 1 TIMES SWITH POWER TO 10000 CYCLES AT A SPEED OF 30 CYCLES FOR 1 MIN.
1)CONTACT RESISTANCE
SHALL BE ≥300mΩ.
2)LIFETIME:10000次
1.6.2
HEAT RESISTANCE
THE SWITCH SHALL BE STORED AT A TEMPERATURE OF 85±2℃ FOR 96 HOURS.AND THEN IT SHALL BE SUBJECTED TO THE CONTROLLED RECOVERY CONDITIONS FOR 1 HOUR AFTER WHICH
MEASUREMENT SHALL BE MADE.
THERE SHALL BE NO
DAMAGE ONAPPEARANCE.
MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED.
1.6.3
COLD RESISTANCE
THE SWITCH SHALL BE STORED AT A TEMPERATURE OF-25±3℃ FOR 96 HOURS.AND THEN IT SHALL BE SUBJECTED TO THE CONTROLLED RECOVERY CONDITIONS FOR 1 HOUR AFTER WHICH
MEASUREMENT SHALL BE MADE.
1.6.4
HUMIDITY TEST
THE SWITCH SHALL BE STORED AT A TEMPERATURE OF 40±2℃ AND A HUMIDITY OF 80% TO 85% FOR 96 Hr. THEN THE JACK SHALL BE MAINTAINED AT STANDARD ATMOSPHERIC CONDITION FOR 1 Hr FOR OTHER PROCEDURES.
1.6.5
TEMPERATURE CYCLE
DECREASE FROM 25℃ TO -25℃ IN 30 MINUTES; THEN INCREASE FROM -25℃ TO 85℃ TO COMPLETE 0NE CYCLE.TOTAL 5 CYCLES. MEASURE AFTER 1 HOURS 0F RECOVERY IN STANDARD ATMOSPHERIC CONDITIONS.
THERE SHALL BE NO DAMAGE ONAPPEARANCE. MECHANICAL AND ELECTRICAL CHARACTERISTICS SHALLBE SATISFIED.
1.6.6
24 HOUR SALT SPRAY TEST
1）SALT SOLUTION MASS CONENTRATION(5 + 0.1)%; PH VALUE 6.5~7.2;SALT WATER BUCKET TEMPERATURE 35 + 2℃,SPRAY PRESSURE 0.12MPa FOR 24 HOURS. SALT SPRAY COLLECTION 1.0~2.0ml/ (80c㎡.H).
2) SALT SEDIMENT WATER WASHED OUT AFTER TEST AFTER DRY DRYING AFTER STANDING FOR 30 MINUTES TO DETECT.
NO REMARKABLE CORROSION SHALL BE RECOGNIZED IN METAL PART
1.7. .SOLDERING PROPERTIES
1.7.1
SOLDERING CONDITIONS
1）HAND SOLDERING：
DIVCE：SOLDER IRON.
270℃MAX.,3 sec Max
2) REFLOW SOLDERING：≤250℃
THERE SHALL BE NO DAMAGE ONAPPEARANCE. MECHANICAL AND ELECTRICAL
CHARACTERISTICS SHALL BE SATISFIED.
2.DRAWING & DIMENSION:
1. PARTS LIST:
NO.
Quantity
Name
Material
Colour
1
1
Plastic Base
PA6T
Black
2
8
Terminal
Ag PLATED
Silvery
3
2
CONTACT CLIP
Ag PLATED
Black
4
1
KNOB
PA46
Black
5
1
Cover board
SUS
Silvery
2. PACKING:
2.1
Packing material:
Double-layers paper cartonPlastic bag
2.2
Packing number:
500pcs/bag
3bags*500pcs=1500pcs/box
4boxes*1500pcs=6000pcs2.3
Weight:
Net Weight: XX kgGross Weight: XX kg
2.4
Size:
X x X x X CM /XCBM
Skype
QQ