PS585-L-4 lock push button switch 5.8×5.8mm pushbutton switch with 4 pins
Series:PS585 series
Type: PS585-L-4
Construction category: D
Operation method: Push button switch
Configuration: Double-Pole Double-Through (DPDT)
Terminal form: Solder Terminal
Protection: IP40
- Applications
- Technical parameters
- Remarks
-
Widely used in home appliance, electronic equipment, automatic machine, communication equipment, car electron, apparatus and instrument, electric motion tool etc.
Rice cooker
Slow cooker
Electric Heating Faucet
Shredder
Computer mouse
Electromagnetic lock
Baby chair
CNC machine tools
Power generator
Test equipment
Elevator
Power tools
Air conditioner
Water heater control panel
Bathroom products
Vacuum cleaner
Kitchen products
Gas valve
Range hood machine
Microwave oven
Pass-through machine
3.DETAIL SPECIFICATIONS:
Type:PS585-L-4
Construction category:D
Operation method:Push button switch
Configuration:Double-Pole Double-Through (DPDT)
Terminal form:Solder Terminal
Protection:IP40
Ratings: DC30V 0.1A
3.1 General
3.1.1Application This specification is applied to KAN-J4 Power Switch used for electronic equipment.
3.1.2 Operating temperature range -10℃ to +70℃
3.1.3 Test conditions Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
Ambient temperature:15~35℃
Relative humidity:45~85%
Air pressure:86~106kPa (860~1060 mbar)
Should any doubt arise in judgment. tests shall be conducted at the following conditions.
Ambient temperature:20±2℃
Relative humidity:60~70%
Air pressure:86~106kPa (860~1060 mbar)
3.2Appearance construction and dimensions
3.2.1 Appearance Switch shall have good finishing, and no rust crack or plating failures.
3.2.2Construction and dimensions Refer to individual product drawing.3.3. Electrical Characteristics
NO.
Items
Test conditions
3.3.1
Contact resistance
The contact resistance should be 100mΩ(Max).
3.3.2
Insulation resistance
It is measured with 500V DC 1minute should be 100MΩ(Min).
3.3.3
Dielectric strength
AC 2000V,1min.(before endurance test)
AC 4000V,1min.(after endurance test)
3.4 Mechanical Characteristics
Item
Description
Test Conditions
1
Operating Force
180gf±50
2
Operating Life
The mechanical life all of 50 000 cycles
3
Contact Spacing
Min. 3.0mm (IEC61058)
3.5Durability
NO.
Item
Test condition
Criteria
3.5.1
Endurance
(According to
UL61058)
DC30V 0.1A
Switch shall be operated according to following sequence
(Test1~Test2)
Voltage
Current
Power factor
Operation rate
Number of operation
Test1
30V
0.1A
0.75-0.8
50-60
cycles/min
50000cycles
Test2
30V
0.1A
0.75-0.8
50-60
cycles/min
50000cycles
Voltage proof(Cut-off current:0.5mA)
DC30V 0.1A
Switch shall be operated 50,000 cycles at 50-60 cycles/min.
Test voltages shall be applied for 1 min
Insulation resistance(item 4.2):
50MΩ MIN
Voltage proof:
Terminal and ground:1000VAC
No dielectric breakdown shall occur.
Operating characteristic (item 5.1):
Operating characteristic variety
Within ±20% of specifiedvalue .
6000 cycles temperature rise:45℃MAX;
10,000 cycles temperature rise:55℃ MAX;
No abnormalities shall be recognized in appearance and construction
3.5.2
Endurance
(According to EN61058-1
/IEC61058-1)
DC30V 0.1A
Switch shall be operated 50,000 cycles at 50~60 cycles/min
Voltage proof(Cut-off current:0.5mA)
Test voltages shall be applied for 1 min.
Insulation resistance(item 4.2):
50MΩ MIN
Voltage proof:
Terminal and terminal:750VAC
Terminal and ground:1500VAC
No dielectric breakdown shall occur.
Operating characteristic (item 5.1):
Operating characteristic variety
Within ±20% of specifiedvalue .
Temperature rise:55℃ MAX
No abnormalities shall be recognized in appearance and construction
3.6. SOLDERING
Solder ability and Resistance to sold heat according to IEC 68-2-20
4. DRAWING & DIMENSION:5. PACKING:
5.1
Packing material:
Plastic box /
Double-layers paper carton5.2
Packing number:
500 pieces per bag
8 bags per inner carton
3 inner cartons per shipping carton
Each shipping carton 12000 pieces5.3
Weight:
Gross Weight: 5.35 kg
Net Weight: 5.05 kg
5.4
Size:
57.0 x 26.0 x 32.0 CM / 0.045CBM
PARTS LIST:
NO.
quantity
Items
Material
1
1
导心 guide core
POM
2
1
盖 cover
POM
3
1
钓簧 crochet hook
steel wire 不锈钢
4 1 底座 case
PBT
5 1 钓簧 spring
steel wire 不锈钢
6 1 连接脚 Injection terminal
PA66
7 1 接触 spring sheet
phosphor bronze 磷青铜
8 1 引脚 terminal
brass 黄铜
Note: Returned plastic should not exceed 20%.