PS4-B710-60 power push button switch with 2 pins self-lock pushbutton switch

Series:PB04series

Description:

Type:                             PS4-B710-60
Construction category:    D
Operation method:          Push button switch
Configuration:                 Single-Pole Single -Throw (SPST)
Terminal form:                Solder Terminal
Protection:                     IP40

Contact Now

  • Applications
  • Technical parameters
  • Remarks

Widely used in home appliance, electronic equipment, automatic machine, communication equipment, car electron, apparatus and instrument, electric motion tool etc.
Rice cooker
Slow cooker
Electric Heating Faucet
Shredder
Computer mouse
Electromagnetic lock
Baby chair
CNC machine tools
Power generator
Test equipment
Elevator
Power tools
Air conditioner
Water heater control panel
Bathroom products
Vacuum cleaner
Kitchen products
Gas valve
Range hood machine
Microwave oven
Pass-through machine


3.DETAIL SPECIFICATIONS:
Type:PS4-B710-60
Construction category:D
Operation method:Push button switch
Configuration:Single-Pole Single -Throw (SPST)
Terminal form:Solder Terminal
Protection:IP40
Ratings: 10(8)A 250V, 8A/128A 250VAC                      
Withstand voltage 2000VAC,1Min
3.1  General
3.1.1Application This specification is applied to KAN-J4 Power Switch used for electronic equipment.
3.1.2 Operating temperature range 0℃ to +85℃                                
3.1.3  Test conditions Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
Ambient temperature:15~35℃
Relative humidity:45~85%
Air pressure:86~106kPa (860~1060 mbar)
Should any doubt arise in judgment. tests shall be conducted at the following conditions.
Ambient temperature:20±2℃
Relative humidity:60~70%
Air pressure:86~106kPa (860~1060 mbar)
3.2Appearance construction and dimensions
3.2.1 Appearance Switch shall have good finishing, and no rust crack or plating failures.
3.2.2Construction and dimensions Refer to individual product drawing.

3.3. Electrical Characteristics

NO.

Items

Test conditions

3.3.1

Contact resistance

The contact resistance should be 50mΩ(Max).

3.3.2

Insulation resistance

It is measured with 500V DC 1minute should be 100MΩ(Min).

3.3.3

Dielectric strength

AC 2000V,1min.(before endurance test)

 AC 4000V,1min.(after endurance test)

 

3.4 Mechanical Characteristics

Item

Description

Test Conditions

1

Operating Force

300gf±100

2

Operating Life

The mechanical life all of 10 000 cycles

3

Contact Spacing

Min. 3.0mm (IEC61058)

 

3.5Durability

NO.

Item

Test condition

Criteria

3.5.1

Endurance

(According to

 UL61058)

8A/128A 250VAC

Switch shall be operated according to following sequence

(Test1~Test2)

 

Voltage

Current

Power factor

Operation rate

Number of operation

Test1

250V

8A

0.75-0.8

6-10

cycles/min

50cycles

Test2

250V

8A

0.75-0.8

6-10

cycles/min

6000cycles

Voltage proof(Cut-off current:0.5mA)

8A/128A 250VAC

Switch shall be operated 10,000 cycles at 15-20 cycles/min.

Test voltages shall be applied for 1 min

Insulation resistance(item 4.2):

50MΩ MIN

Voltage proof:

Terminal and ground:1000VAC

No dielectric breakdown shall occur.

Operating characteristic (item 5.1):

Operating characteristic variety

Within ±20% of specifiedvalue .

6000 cycles temperature rise:45MAX;

10,000 cycles temperature rise:55 MAX;

 

No abnormalities shall be recognized in appearance and construction

3.5.2

Endurance

(According to EN61058-1

/IEC61058-1)

8A/128A 250VAC

Switch shall be operated 10,000 cycles at 15~20 cycles/min

Voltage proof(Cut-off current:0.5mA)

Test voltages shall be applied for 1 min.

Insulation resistance(item 4.2):

50MΩ MIN

Voltage proof:

Terminal and terminal:750VAC

Terminal and ground:1500VAC

No dielectric breakdown shall occur.

Operating characteristic (item 5.1):

Operating characteristic variety

Within ±20% of specifiedvalue .

Temperature rise:55 MAX

No abnormalities shall be recognized in appearance and construction


3.6. SOLDERING
Solder ability and Resistance to sold heat according to IEC 68-2-20


4. DRAWING & DIMENSION:


5. PACKING:

5.1

 Packing material:

Plastic box /
Double-layers paper carton

5.2

 Packing number:

50 pieces per bag
5 bags per inner carton
3 inner cartons per shipping carton
Each shipping carton 750 pieces

5.3

Weight:

Gross Weight:    kg

Net Weight:        kg

5.4

 Size:

57.0 x 26.0 x 32.0 CM / 0.045CBM

SAFETY APPROVAL & RATING:

Approved Rating

Mark

Reference No.

 10(8)A 250VAC

UL&CUL

E176213

10(8)A 250VAC

VDE

133477

10(8)A 250VAC

CQC

CQC02002002687

10(8)A 250VAC

NEMKO

200118250

10(8)A 250VAC

SEMKO

0118223/01

10(8)A 250VAC

FIMKO

16797

10(8)A 250VAC

DEMKO

130084-01

10(8)A 250VAC

CE

JSH0305044/001

 

PARTS LIST:

NO.

quantity

Items

Material

1

1

Base

Bakelite PF2A5-151(j)b

2

1

Handspike

Plastic PBT4308

3

1

Cover board

Steel strip SPCC-SD, Copper-Tin plated

4 1 Spring holder

1Cr18Ni9Ti-0.8

5 1 Spring

Beryllium alloy QBe2

6 1 Fulcrum

Brass alloy H65, Silver plated

7 1 Contact arm

Brass alloy H65, Silver plated

8 2 Moving contact

AgNi10/Cu

9 2 Contact arm

Brass alloy H65, Silver plated

10 2 Terminal

Brass alloy H65, Silver plated

11 1 Flxed contact

AgNi10/Cu

12 1 Spring

Beryllium alloy Qbe2

13 2 Releasing spring

Carbon spring steel threadNickel plated

Note: Returned plastic should not exceed 20%.

return