PBM12 dia 12mm IP68 anti-vandal 2A metal push button switch with good quality
Series:PBM Series
Type: PBM12
Construction category: D type
Operation method: Push button switch
Configuration: Single-Pole Single -Throw (SPST)
Terminal form: Solder Terminal
Protection: IP67
Ratings: 2A 36VDC
Withstand voltage: 1000VAC,1Min
- Applications
- Technical parameters
- Remarks
-
Enormous remote
controller and portable remote controller
Instrumentation
Medical equipment
Telecommunications and networking equipment
Computers & peripherals
Instrumentation and controls
Industrial electronic equipment
Industrial remote controller
Medical Equipment
Communication
Outdoor Controls
Public building, Home security, Business building, Industrial equipment…etc.
3. DETAIL SPECIFICATIONS:
Type:PBM12
Construction category:D
Operation method: Push button switch
Configuration: Single-Pole Single -Throw (SPST)
Terminal form: Solder Terminal
Protection: IP67
Ratings 2A 36VDC
Withstand voltage 1000VAC,1Min
3.1 General
3.1.1 Application This specification is applied to KAN-J4 Power Switch used for electronic equipment.
3.1.2 Operating temperature range 0℃ to +125℃
3.1.3 Test conditions Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
Ambient temperature: 15~35℃
Relative humidity: 45~85%
Air pressure: 86~106kPa (860~1060 mbar)
Should any doubt arise in judgment. tests shall be conducted at the following conditions.
Ambient temperature: 20±2℃
Relative humidity: 60~70%
Air pressure:86~106kPa (860~1060 mbar)
3.2Appearance construction and dimensions
3.2.1 Appearance Switch shall have good finishing, and no rust crack or plating failures.
3.2.2Construction and dimensions Refer to individual product drawing.
3.3. Electrical CharacteristicsNO.
Items
Test conditions
3.3.1
Contact resistance
The contact resistance should be 50mΩ(Max).
3.3.2
Insulation resistance
It is measured with 500V DC 1minute should be 100MΩ(Min).
3.3.3
Dielectric strength
AC 2000V,1min.(before endurance test)
AC 1500V,1min.(after endurance test)
3.4 Mechanical Characteristics
Item
Description
Test Conditions
1
Operating Force
5.25N±1.2N
2
Operating Life
The mechanical life all of 10 000 cycles
3
Contact Spacing
Min. 3.0mm (IEC61058)
3.5Durability
NO.
Item
Test condition
Criteria
3.5.1
Endurance
(According to
UL61058)
2A 36VDC
Switch shall be operated according
to following sequence(Test1~Test2)
Voltage
Current
Power
factorOperation
rateNumber
of
operationTest1
36V
2A
0.75-0.8
6-10
cycles/min
50cycles
Test2
36V
2A
0.75-0.8
6-10
cycles/min
6000cycles
Insulation resistance(item 4.2):
50MΩ MIN
Voltage proof:
Terminal and ground:1000VAC
No dielectric breakdown shall occur.
Operating characteristic (item 5.1):
Operating characteristic variety
Within ±20% of specifiedvalue .
6000 cycles temperature
rise:45℃MAX;
10,000 cycles temperature
rise:55℃ MAX;No abnormalities shall be
recognized in appearance
and construction3.5.2
Endurance
(According to EN61058-1
/IEC61058-1)
2A 36VDC
Switch shall be operated 50,000
cycles at 15~20 cycles/min
Voltage proof(Cut-off current:0.5mA)
Test voltages shall be applied
for 1 min.
Voltage proof(Cut-off
current:0.5mA)
2A 36VDC
Switch shall be operated 50,000
cycles at 15-20 cycles/min.
Test voltages shall be applied
for 1 minInsulation resistance(item 4.2):
50MΩ MIN
Voltage proof:
Terminal and terminal:750VAC
Terminal and ground:1500VAC
No dielectric breakdown
shall occur.
Operating characteristic (item 5.1):
Operating characteristic variety
Within ±20% of specifiedvalue .
Temperature rise:55℃ MAX
No abnormalities shall be
recognized in appearance
and construction3.6. SOLDERING
Solder ability and Resistance to sold heat according to IEC 68-2-20
4. DRAWING & DIMENSION:
5. PACKING:
5.1
Packing material:
Plastic box /
Double-layers paper carton5.2
Packing number:
5.3
Weight:
5.4
Size:
SAFETY APPROVAL & RATING:
Approved Rating
Mark
Reference No.
2A 36VDC
UL&CUL
VDE
CQC
PARTS LIST:
NO.
quantity
Items
Material
1
1
terminal
Copper, Golden plated
2
1
Cap
PTB
3
1
base
Al alloy black oxide plated
4
1
nut
Brass Ni plated
Note: Returned plastic should not exceed 20%.
Skype
QQ