1M31SWT2B4M7QES 3 Ways 6 Pins Metal ON-OFF-ON Rocker Arms Toggle Switch
Series:1M31SWT2B4M7QES
DETAIL SPECIFICATIONS:
Type: 1M31SWT2B4M7QES
Construction category: D type
Operation method: Gear shifting
Configuration: Three-Pole Double-Through (3PDT)
Terminal form: Solder Terminal
Mounting: Whole embedding
Protection: Comply with IP40
- Applications
- Technical parameters
- Remarks
-
1.Digital Products: digital camera, digital video and so on;
2.Remote Control: the remote control of automobile domestic security products;
3.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;
4.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ，refrigerator，washer;air-conditioning and so on;
5.Security Products: visual interphone, monitor and so on;
6.Toys: electric toys and so on;
7.Computer Products: PC camera and so on;
8.Exercises Machines: treadmills, massage armchair and so on;
9.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
10.Others: laser pen ，Pointer，Wireless mouse remote control pen，Laser projection pen，page turner，electronic pen；MousePen；overhead projector and so on;
11.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders，automotive sets, etc.
12.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine, Music Instrument, etc.
3.1 OPERATING CHARACTERISTICS
Characteristics
Units
Standards
Requirements
Actuating Force
N
500gram 1000gram 2000gram.
500±100grams
1000±200grams
2000±400grams
3.2 GENERAL
3.2.1 Application This specification is applied to1MS3 T8-XH SERIES Switch used for electronic instrument panel.
3.2.2 Operating Temperature Range -30 ℃~+85℃
3.2.3 Test Conditions Unless otherwise specified. The atmospheric conditions for making measurements and
tests are as follows:
Ambient temperature: 15~35℃
Relative humidity: 45~85%
Air pressure: 86~106kPa (860~1060 mbar)
Should any doubt arise in judgment. It shall be conducted at the following conditions.
Ambient temperature: 20±2℃
Relative humidity: 60~70%
Air pressure: 86~106kPa (860~1060 mbar)
3.3 Appearance construction and dimensions
3.3.1 Appearance Switch shall have good finishing, and no rust crack or plating failures.
3.3.2 Construction and dimensions Refer to individual product drawing.
3.4. Contact Rating：
NO.
Plating
Rating
3.4.1
Q=Silver
Fixed Terminal：Silver plated over copper
Alloy. Movable contact：Silver plated over
copper alloy.
5Amps @120VAC
or28VDC.
2Amps @250VAC.
3.4.2
C=Gold over silver
Fixed Terminal：Copper alloy with silver
Plated over gold plate. Movable contact：Copper alloy with silver
Plated over gold plate.
3.4.3
S=Silver, tin-lead
Fixed Terminal：Copper alloy with silver plated , tin-lead.
Movable contact：Silver plated over
Copper alloy.
3.4.4
K=Gold over silver
tin-lead
Fixed Terminal：Copper alloy with silver plated over gold plate, tin-lead. Movable contact：Copper alloy with silver
Plated over gold plate.
3.5. Gold Plating Standard
No.
Item
Plating
Rating
3.5.1
R=Gold
Fixed Terminal：Copper alloy with gold. Plate over nickel plate. Movable contact：Copper alloy with gold. Plate over nickel plate.
0.4 VA Max.
@20VAC or DC
Max.
3.5.2
G=Gold, tin-lead
Fixed Terminal：Copper alloy with gold plate over nickel plate,tin-lead.
Movable contact：Copper alloy with gold plated over nickel plate.
plate over nickel plate.
4. Test Sequence:
Item
Description
Test Conditions
Requirements
1
Visual Examination
By Visual Examination check without and out pressure &testing.
There shall be no defects that affect the
serviceability of
the product.
2
Contact Resistance
@2-4VDC 100mA. For both
silver and gold plated contacts.
30mΩ Max
3
Insulation
Resistance
Measurements shall be made following application of1000 V/ DC 100mA potential across terminals and cover.
1000MΩ min/1000V
4
Dielectric
Withstanding
Voltage
1000 VAC(50Hz or 60Hz) shall be applied across terminal sand cover for 1 minute.
There shall be no break down or flashover.
5
Solder Heat
Resistance
WAVE SOLDERING：1Soldering Temperature:260±5℃.2Duration of Solder Immersion: 5 ±1 and3Frequency of Soldering Process 2times max.(PCB is 1.6mm in thickness) 2~4.
1Shall be free from
pronounced backlash
falling-off or breakage terminals2As shown in item
6
Vibration
Shall be vibrated in accordance with Method 201A ofMIL-STD-202F1Frequency: 10-55-10Hz in1-min/cycle.
As shown in item 2~4
7
Shock
Shall be shocked in accordance with Method 213B condition A ofMIL-STD-202F1Acceleration; 5kg2Action time: 11±1m seconds.3Testing Direction: 6 sides.4Test Cycle: 3 times in each direction.
As shown in item 2~4
8
Actuation Force
MODEL-1305N MECHANICAL TEST500gram 、1000gram、 2000gram.
At for test the force.Force:500±100grams;1000±200grams;
2000±400grams
9
Operating Life
Measurements shall be made following the test forth below:
15A,120VAC resistive load－silver plated. 2A,250VAC resistive load－silver plated.0.4A, 20VAC resistive load－gold plated.2 Rate of Operation: 6-8operationcycles per minute.3 Electronics Life Test: 6,000 cycles.
1 Dielectric
Strength：1000V.2 Insulation
Resistance:
1000MΩ min.
Mechanical Life Test: 40,000 cycles.
Contact Resistance: 10mΩ Max.
10
Resistance Low Temperature
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for 1 hour before the measurements are made:1Temperature:-40±3℃
2Time:96 hours.
As shown in item
2~4.
11
Resistance High Temperature
Following the test set forth below the sample shall be left in normal temperature and humidity conditions for an hour before the measurements are made:1Temperature:85±2℃2Time:96 hours.
1Asshownin item3~4.
2.InsulationResistance:1000MΩ
12
Resistance Humidity
Following the test set forth below
the sample shall be left in normal
temperature and humidity conditions
for an hour before the measurements
are made:1Temperature:40±2℃2Relative Humidity:90~95%3Time:96 hours.
1ContactResistance:
10 mΩ Max.
2Insulation
Resistance:
1000MΩ min.
13
The SaltTesting
Following the test set forth belowthe sample shall be left in normal 1Temperature:35±2℃ 2The ratio of salt-water：5% 3The spray amout of salt- water：1~2 ml/h.Time:48 hours.
The testing standard based on bubble, crack, and magnifying glass with gauge.
5. Precautions in Handling
Care should be exercised so that flux from the upper part of the printed circuit
board does not adhere to the switch.
6. DRAWING & DIMENSION:
7.CIRCUIT DIAGRAM：
8. PARTS LIST:
Note: Returned plastic should not exceed 20%.
NO.
quantity
Items
Material
1
1
CASE
Diallyl phthalate (DAP) (UL94V-0)
2
1
ACTUATOR
Brass, chrome plated
3
1
BUSHING
Brass nickel plated
4
1
HOUSING
Stainless Steel
5
1
TERMINAL/CONTACT
Silver or gold plated
RoHS& Lead Free
9. PACKING:
9.1
Packing material:
Plastic box /
Five -layers paper carton
9.2
Packing number:
25pcs/bag, 4bags in a box , 10 box in a cargo, 1000pcs/cargo
9.3
Weight:
Gross Weight: 6 kg
Net Weight: 3.85 kg
9.4
Size:
x x mm
Skype
QQ