3MS1SWJ102VS2QES free sample ON-OFF 3 pins round waterproof rocker switch

Series:3MS1

Description:

Type:                                  3MS1SWJ102VS2QES 
Construction category:   D
Operation method:          Rocker Action
Configuration:                  Single-Pole Double-Through (SPDT)
Terminal form:                 #PCB-connect Terminal
Mounting:                          Snap-In
Protection:                        IP67

Contact Now

  • Applications
  • Technical parameters
  • Remarks

Home / Household Appliances
Electric kettle, Robot cleaner, Dust catcher, Vacuum cleaner, Coffee maker, Running machine etc.
Electronic Equipment
Toys, Power tools, Car control panel etc.
Medical Equipment
Communication Equipment
Automation Equipment
Automotive Electronics
Instrumentation

1.DETAIL SPECIFICATIONS:
Type:3MS1SWJ102VS2QES
Construction category:D
Operation method:Rocker Action
Configuration:Single-Pole Double -Throw (SPDT)
Terminal form:#187 quick-connect Terminal
Mounting:Snap-In
Protection:IP65

1.1  General

1.1.1 Application                 This specification is applied to 3MS1 Power Switch used for electronic equipment.

1.1.2 Operating temperature range     -30℃ to +85℃                               

1.1.3 Test conditions                 Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows

Ambient temperature:                       15~35℃

Relative humidity:                           45~85%

Air pressure:                                    86~106kPa (860~1060 mbar)

Should any doubt arise in judgment. tests shall be conducted at the following conditions.

Ambient temperature:                     20±2℃

Relative humidity:                           60~70%

Air pressure:                                    86~106kPa (860~1060 mbar)

1.2 Appearance construction and dimensions

 

1.2.1 Appearance                                Switch shall have good finishing, and no rust crack or plating failures.

1.2.2 Construction and dimensions    Refer to individual product drawing.

1.3. Electrical Characteristics

 NO.

Items

Test conditions

1.3.1

Contact resistance

The contact resistance should be 10mΩ(Max).

1.3.2

Insulation resistance

It is measured with 500V DC 1minute should be 1000MΩ(Min).

1.3.3

Dielectric strength

AC 2000V,1min.(before endurance test)

AC 2500V,1min.(after endurance test)

1.4 Mechanical Characteristics

Item

Description

Test Conditions

1

Operating Force

350gf±100

2

Mechanical life

The mechanical life all of 10 000 cycles

3

Electrical gap

Min. 3.0mm (IEC61058)

 

1.5 Durability

NO.

Item

Test condition

Criteria

1.5.1

Endurance

(According to

 UL61058)

5A 120VAC 2A 250VAC

Switch shall be operated according to following sequence

(Test1~Test2)

 

Voltage

Current

Power factor

Operation rate

Number of operation

Test1

120V

3A

0.75-0.8

6-10

cycles/min

50cycles

Test2

120V

3A

0.75-0.8

6-10

cycles/min

40000cycles

Voltage proof(Cut-off current:0.5mA)

5A 120VAC 2A 250VAC

Switch shall be operated 40,000 cycles at 15-20 cycles/min.

Test voltages shall be applied for 1 min

Insulation resistance(item 3.2):

1000MΩ MIN

Voltage proof:

Terminal and ground:1000VAC

No dielectric breakdown shall occur.

Operating characteristic (item 4.1):

Operating characteristic variety

Within ±20% of specifiedvalue .

6000 cycles temperature rise:45MAX;

10,000 cycles temperature rise:55 MAX;

 

No abnormalities shall be recognized in appearance and construction

1.5.2

Endurance

(According to EN61058-1

/IEC61058-1)

5A 120VAC 2A 250VAC

Switch shall be operated 10,000 cycles at 15~20 cycles/min

Voltage proof(Cut-off current:0.5mA)

Test voltages shall be applied for 1 min.

Insulation resistance(item 3.2):

1000MΩ MIN

Voltage proof:

Terminal and terminal:750VAC

Terminal and ground:1500VAC

No dielectric breakdown shall occur.

Operating characteristic (item 5.1):

Operating characteristic variety

Within ±20% of specifiedvalue .

Temperature rise:55 MAX

No abnormalities shall be recognized in appearance and construction

 

1.6. SOLDERING

Solder ability and Resistance to sold heat according to IEC 68-2-20

2. DRAWING & DIMENSION:

3. PACKING:

3.1

Packing material:

Plastic box 
Double-layers paper carton

3.2

Packing number:

 

3.3

Weight:

 

3.4

Size:

 

 

SAFETY APPROVAL & RATING:

Approved Rating

Mark

Reference No.

 

UL&CUL

E104190

 

VDE

 

 

CQC

 

 PARTS LIST:

NO.

Items

Material

1

Case

Phthalate (DAP)(UL94v.0).

2

Actuator

Nylon black std.

3

Bushing

Brass, nickel plated.

4

Housing

Stainless Steel.

5

Switch Support 

Brass, Tin plated.

6

Terminals/contact

Brass, silver or gold plated

Returned plastic should not exceed 20%.

return