
6021-SWK1C1T2CU 2Ways 4 Pins Metal ON-OFF Rocker Arms Toggle Switch
Series:6021-SWK1C1T2CU
DETAIL SPECIFICATIONS:
Type: 6021-SWK1C1T2CU
Rating: 16A 250VAC, 16A 125VAC
Function: DPST
Terminal form: Solder Terminal
Mounting: Whole embedding
Protection: Comply with IP40
- Applications
- Technical parameters
- Remarks
-
1.Digital Products: digital camera, digital video and so on;
2.Remote Control: the remote control of automobile domestic security products;
3.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;
4.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ,refrigerator,washer;air-conditioning and so on;
5.Security Products: visual interphone, monitor and so on;
6.Toys: electric toys and so on;
7.Computer Products: PC camera and so on;
8.Exercises Machines: treadmills, massage armchair and so on;
9.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
10.Others: laser pen ,Pointer,Wireless mouse remote control pen,Laser projection pen,page turner,electronic pen;MousePen;overhead projector and so on;
11.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders,automotive sets, etc.
12.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine, Music Instrument, etc.
1. DETAIL SPECIFICATIONS:
Type: 6021-SWK1C1T2CU
Rating: 16A 250VAC, 16A 125VAC
Function: DPST
1.1 OPERATING CHARACTERISTICS
NO.
ITEM
TEST CONDITIONS
PERFORMANCE
1.1.1
Operating Force
The test point is 3mm away from the rubber handle. After three times, the test is carried out.
1000gf±500gf
1.1.2
Terminal Strength
In the front row of feet, any square type plus (500gf) strength test will take 15 seconds.
There are no cracks, loosening and other abnormalities in the terminals to meet the mechanical and electrical properties.
1.1.3
Shank strength
The force of 1Kgf is applied at the front of the handle, and the displacement should be fixed along the direction of the mark.
There is no serious deformation of the handle, and it can work normally.
Actuating Force:
The force required to move the actuator from the free to the operation position
1.2 GENERAL CHARACTERISTICS
1.2.1 Application: This specification is applied to 6021 Toggle Switch used for electronic equipment.
1.2.2 Operating temperature range: 0℃ + 105℃
1.2.3 Test conditions : Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
Ambient temperature: 15~35℃
Relative humidity: 45~85%
Air pressure: 86~106kPa (860~1060 mbar)
1.3 APPEARANCE, STRUCTURE AND DIMENSION
1.3.1 Appearance :Switch shall have good finishing, and no rust crack or plating failures.
1.3.2 Construction and dimensions: Refer to individual product drawing.
1.4. Electrical specifications
NO.
ITEM
TEST CONDITIONS
PERFORMANCE
1.4.1
Contact
resistanceThe 2-4VDC is tested under tiny current (below 100mA), silver plated or gold plated.
20mΩ MAX
1.4.2
Insulation
resistanceInput 500V DC voltage for 1 minutes, test according to the following contact mode:
(1)Between the terminal.
(2)Between the terminal and the outer shell.
100MΩ MIN
1.4.3
Pressure resistance
Measurement of AC 1500V (50-60 Hz) between open contacts and poles
Measurement of AC 3000V (50~60Hz) between terminal and grounding
Fixed time: 1 minute eachNo abnormality, such as insulation damage
1.5 EnduranceNO.
ITEM
TEST CONDITIONS
PERFORMANCE
1.5.1
Load life (A)
(UL1054 standard)16A 125VAC
The switch is tested in the order of Test 1 and Test 2.
Voltage
Steady current
power factor
Test 1
125V
20A
0.75~0.8
Test 2
125V
16A
0.75~0.8
Opening and closing speed(cycles/min)
Opening and closing speed(cycle)
Test 1
6~10
50
Test 2
6~10
6,000
After Experiment 2:
The rated current and insulation resistance can be switched on and off after the test. (1.5.2)100MΩMin. Withstand voltage AC 1000V No insulation damage after 1 minute test, Operating Force(1.1.1)Within the range of + 10% or - 30% of specifications. No abnormal appearance structure, Temperature rise: below 30℃ Max1.5.2
Load life (B)
(UL1054 standard)10A 277VAC
The switch is tested in the order of Test 1 and Test 2
Voltage
Steady current
power factor
Test 1
277V
15A
0.75~0.8
Test 2
277V
10A
0.75~0.8
Opening and closing speed(cycles/min)
Opening and closing speed(cycle)
Test 1
6~10
50
Test 2
6~10
6,000
C 1000V No insulation damage after 1 minute test, Operating Force(1.1.1)Within the range of + 10% or - 30% of specifications. No abnormal appearance structure, Temperature rise: below 30℃ Max
1.6 ENVIRONMENT RESISTANCE
NO.
ITEM
TEST CONDITIONS
PERFORMANCE
1.6.1
Cold tolerance test
It was placed at a temperature of -20±2℃, and then placed in normal room temperature for 1 hours after 96 hours.
Contact resistance:100nΩMax.
Insulation resistance:100MΩMin.
Pressure resistance:
Measurement of AC 1500V (50-60 Hz) between open contacts and poles
Measurement of AC 3000V (50~60Hz) between terminal and grounding
Fixed time: 1 minute each Operating Force(3.1.1)Within the range of + 10% or - 30% of specifications. No abnormal appearance structure, No abnormalities such as insulation damage1.6.2
Heat resistance test
It was placed at a temperature of 85 + 2℃, and then placed at normal room temperature for 1 hours after 96 hours.
1.6.3
Moisture resistance
In the environment of 40 2 C and 90 ~ 95% relative humidity, the determination was carried out within 1 hour in room temperature and humidity.
1.7 SAFEKEEPING METHOD:
(1)If the product is not used immediately, it should be kept at normal temperature without direct sunlight and corrosive gases.
In the environment. But we recommend that we use it as soon as 6 months.
(2)Put the finished products in plastic bags and seal them in the same environment as soon as possible, and use them as soon as possible. Do not overlay excess when saved in order to prevent the pressure from breaking.
(3)Do not overlay excess when saved in order to prevent the pressure from breaking.
2. DRAWING & DIMENSION:
3.CIRCUIT DIAGRAM:
PART LIST:
NO.
PART NAME
QTY
MATERIAL
1
NUT
2
STEEL Ni PLATED
2
WASHER
1
STEEL Zn PLATED
3
LOCKING WASHER
1
STEEL Zn PLATED
4
BUSHING
1
BRASS Ni PLATED
5
BRACKET
1
STEEL Zn PLATED
6
TOGGLE HANDLE
1
BRASS Cr PLATED
7
COVER
1
NYLON 66 GLASS REINFORCED
8
HOLDER OF TIP
1
POLYBUTYLENE TEREPHTHALATE(PBTP) GLASS REINFORCED
9
SPRING
2
PIANO WIRE OIL
10
TIP
2
MELAMINE/PHENOLIC
11
ARM
2
COPPER Ag PLATED
12
MOVABLE CONTACT
2
Ag ALLOY
13
STATIONARY CONTACT
2
Ag ALLOY
14
TERMINAL
2
COPPER Ag PLATED
15
TERMINAL
2
COPPER Ag PLATED
16
BODY
1
PHENOLIC
17
LABEL
1
PVC
PACKING:
1
Packing material:
Plastic bag
Double-layers paper carton
2
Packing number:
X pieces per box X inner cartons per shipping carton Each shipping carton X pieces
3
Weight:
Gross Weight : xx kg
Net Weight : xx kg
4
Size:
X x Xx X CM