ZLQ19C-G10F stainless steel water-resistant metal push button switch with screw terminal Simon replacement

Series:ZLQ19 series

Description:

Type:                                  ZLQ19C-G10F    
Construction category:  D type
Operation method:         Push button switch
Configuration:                 Single-Pole Single -Throw (SPST)
Terminal form:                Solder Terminal
Protection:                       IP65
Ratings                            2A 36VDC                        

Contact Now

  • Applications
  • Technical parameters
  • Remarks

Application :
Enormous remote
controller and portable remote controller

Instrumentation
Medical equipment

Telecommunications and networking equipment
Computers & peripherals
Instrumentation and controls

Industrial electronic equipment
Industrial remote controller
Medical Equipment
Communication
Outdoor Controls

Public building, Home security, Business building, Industrial equipment…etc.


3.1   General
3.1.1  Application        This specification is applied to KAN-J4 Power Switch used for electronic equipment.
3.1.2 Operating temperature range       -20℃ to +55℃                                
3.1.3  Test conditions           Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
Ambient temperature:            15~35℃
Relative humidity:            45~85%
Air pressure:                86~106kPa (860~1060 mbar)
Should any doubt arise in judgment. tests shall be conducted at the following conditions.
Ambient temperature:            20±2℃
Relative humidity:            60~70%
Air pressure:                86~106kPa (860~1060 mbar)
3.2Appearance construction and dimensions

3.2.1 Appearance                Switch shall have good finishing, and no rust crack or plating failures.
3.2.2Construction and dimensions       Refer to individual product drawing.

3.3.  Electrical Characteristics 

NO.

Items

Test conditions

3.3.1

Contact resistance

The contact resistance should be 50mΩ(Max).

3.3.2

Insulation resistance

It is measured with 500V DC 1minute should be 1000MΩ(Min).

3.3.3

Dielectric strength

AC 1000V,1min.(before endurance test)

 AC 2000V,1min.(after endurance test)

3.4 Mechanical Characteristics 

Item

Description

Test Conditions

1

Operating Force

≤4N

2

Operating Life

The mechanical life all of 200 000 cycles

3

Contact Spacing

Min. 3.0mm (IEC61058)

3.5Durability 

 NO.

Item

Test condition

Criteria

3.5.1

Endurance

(According to

 UL61058)

2A 36VDC 

Switch shall be operated according to following sequence

(Test1~Test2)

 

Voltage

Current

Power factor

Operation rate

Number of operation

Test1

36VDC

2A 

0.75-0.8

6-10

cycles/min

50cycles

Test2

36VDC

2A 

0.75-0.8

6-10

cycles/min

200000cycles

Voltage proof(Cut-off current:0.5mA)

3A 250VAC 

Switch shall be operated 200,000 cycles at 15-20 cycles/min.

Test voltages shall be applied for 1 min

Insulation resistance(item 4.2):

50MΩ MIN

Voltage proof:

Terminal and ground:1000VAC

No dielectric breakdown shall occur.

Operating characteristic (item 5.1):

Operating characteristic variety

Within ±20% of specifiedvalue .

6000 cycles temperature rise:45MAX;

10,000 cycles temperature rise:55 MAX;

 

No abnormalities shall be recognized in appearance and construction

3.5.2

Endurance

(According to EN61058-1

/IEC61058-1)

3A 36VDC 

Switch shall be operated 200,000 cycles at 15~20 cycles/min

Voltage proof(Cut-off current:0.5mA)

Test voltages shall be applied for 1 min.

Insulation resistance(item 4.2):

50MΩ MIN

Voltage proof:

Terminal and terminal:750VAC

Terminal and ground:1500VAC

No dielectric breakdown shall occur.

Operating characteristic (item 5.1):

Operating characteristic variety

Within ±20% of specifiedvalue .

Temperature rise:55 MAX

No abnormalities shall be recognized in appearance and construction


3.6. SOLDERING
Solder ability and Resistance to sold heat according to IEC 68-2-20

4.DRAWING & DIMENSION:

SAFETY APPROVAL & RATING:

Approved Rating

Mark

Reference No.

 

UL&CUL

 

 

VDE

 

 

CQC

 


 PARTS LIST: 

Note: Returned plastic should not exceed 20%.

NO.

quantity

Items

Material

1

1

Base

PA66

2

1

Pushing

PBT/Stainless steel

3

 1

Housing

SUS304/ Brass Nickel plated 

4

1

Contact  

Silver alloy

5

1

Terminal

H62

return