TS6035A-050C-G10 2 pins SMT tact switch, 6X3.5mm height is 5mm, reliable China manufacturer for switch, tact switch with long life
Series:TS6035A
2. DETAIL SPECIFICATIONS:
Type: TS6035A-050C-G10 SERIES
Operation method:Tact Action
Configuration: Tactile feedback
Terminal form: PCB Terminal SMT type(□BRAID □NO BRAID)
Mounting: SMT
Protection: IP40 ■ IP65 □IP67 □IP68
- Applications
- Technical parameters
- Remarks
-
1.Audio Products:MP3,MP4,DVD. Audio;
2.Digital Products: digital camera, digital video and so on;
3.Remote Control: the remote control of automobile domestic security products;
4.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;
5.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ,refrigerator,washer;air-conditioning and so on;
6.Security Products: visual interphone, monitor and so on;
7.Toys: electric toys and so on;
8.Computer Products: PC camera and so on;
9.Exercises Machines: treadmills, massage armchair and so on;
10.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
11.Others: laser pen ,Pointer,Wireless mouse remote control pen,Laser projection pen,page turner,electronic pen;MousePen;overhead projector and so on;
12.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders,automotive sets, etc.
13.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine, Music Instrument, etc.
2.1 General
2.1.1 Application This specification is applied to TACT Switch used for electronic equipment.
2.1.2 Operating temperature range -20℃ ~ +70℃
2.1.3 Storage temperature -30℃ ~ +80℃
2.1.4 Test conditions
Ambient temperature 5~35℃
Relative humidity 45~85%
Air pressure 86~106kPa (860~1060 mbar)
If any doubt arise from the judgment, tests shall be conducted at the following conditions.
Ambient temperature: 20±2℃
Relative humidity 60~70%
Air pressure 86~106kPa (860~1060 mbar)
2.2 Appearance construction and dimensions
2.2.1 Appearance Switch shall have good finishing, and no rust crack or plating failures.
2.2.2 Construction and dimensions Refer to individual product drawing.2.3. ELECTRICAL SPECIFICATION
NO.
Items
Test conditions
Requirements
2.3.1
Contact resistance
Shall be measured at 10mA 5VDC by
voltage drop method after some
operations without load.
Applied position: Between terminal
and terminal
50mΩ MAX
2.3.2
Insulation resistance
Test voltage:100VDC, measured after
1 min ±5s
Applied position: 1)Between terminal
and terminal
2)Between terminal and ground
100MΩ MIN
2.3.3
Dielectric voltage proof
Following test voltages shall be
applied for 1 min.
(Cut-off current:0.5mA)
1)Between terminal and terminal :
250VAC (50~60Hz)
No dielectric
breakdown
shall occur.
2.3.4
Contact bounce
Lightly striking the center of the stem
at a rate encountered in normal use
(3 to 4 times per second), and bounce
shall be tested at “ON”
and “OFF”
ON-5msec.max
OFF-8msec.max
2.4. ENVIRONMENT RESISTANCE:
NO.
Items
Test conditions
Requirements
2.4.1
Resistance to
low temperature
Following the test set forth below
the sample shall be left in normal
temperature and humidity
conditions for 1 h.
Before measurements are made:
Temperature:-30±2℃,
Time: 96h
Contact resistance:
200mΩ MAX
Insulation resistance:
50MΩ MIN
2.4.2
Heat resistance
Following the test set forth below
the sample shall be left in normal
temperature and humidity conditions
for 1h before measurements
are made:
Temperature:-80±2℃,
Time: 96h
2.4.3
Moisture resistance
Following the test set forth below the
sample shall be left in normal
temperature and humidity conditions
for 1h before measurements
are made:
Temperature: 60±2℃,
Relative humidity: 90 to 95%,
Time:96h
Voltage proof:
No dielectric breakdown
shall occur.
2.4.4
Change of
temperature
Following five cycles of the temperature
cycling test set forth below
the sample shall be left in normal
temperature and humidity
conditions for one hour before
measurements are made:
Per cycle:-25℃±2℃/60 min,
+20℃±5℃/30 min,
+70℃±2℃/60 min
+20℃±5℃/30 min
Operating
characteristic
variety
Within ±10% of
specified value
2.4.5
Sulfuration resistance
Following the test set forth below
the sample shall be left in normal
temperature and humidity conditions
for 1h before measurements
are made:
H2S gas concentrations: 3ppm±1ppm,
Time:72h,
Temperature: 40±2℃(90~95%RH)
No remarkable
corrosion shall
be recognized
in metal part.
2.4.6
Salt mist
The switch shall be checked after
following test:
1)Temperature: 35℃±2℃
2)Salt solution : 5±1%(solids by mass)
3)Time: 8±1 hour
After test, salt deposit shall be
removed by running water.
2.5. WELDING PERFORMANCE
2.5.1
Solderability
Switch test under such conditions
and inspect after.
1)Variable temperature range :245±5℃;
2)Dip time:2±0.5s;
Except for the
edge, the coating
should cover a
minimum 90%
2.5.2
Resistance heat soldering
The switch will be inspect under such
conditions below
Trial measure
Temperature(℃)
Time(s)
Slot welding
method
260±5
5±1
Soldering method
350±5
3±0.5
There shall be
no sign of damage
mechanically
and electrically.
2.6. DURABILITY
2.6.1
Operation life
Measurement shall be made following
the test set forth below: DC 12V,
50 mA resistance load,
Rate of operation: 60 times/min.;
Operating Force:1.5 times OF;
Average fault-free life:30,000 cycles
Contact resistance:
≤200mΩ
Contact bounce:
≤10ms
Operating Force:
initial value±30%
2.6.2
Vibration
Measurement shall be made following
the test set forth below:
1) Vibration frequency range: 10Hz to
55Hz to 10Hz;
2) Amplitude: 1.5mm;
3) Direction of vibration: three mutually
perpendicular direction
including the direction of stem travel
4) Duration: Each 2hours.
2.6.3
Operation Force
The switch is placed perpendicular to
the direction of the operation, gradually
force in key top center of switch, measure
maximum intensity when it
conducted required.
260±50gf
2.6.4
Over Travel
Switch at the vertical operating orientation
placement, with a force equal to
2 times according to the static load applied
on the switch button the top
center, measure the top moving distance
0.25±0.10mm
2.6.5
Return force
The sample switch is installed such that the
direction of switch operation is
vertical and upon depressing the stem in its
center to the whole travel
distance, the force of the stem to return to
its free position shall be
measured.
60gf.min.
2.6.6
Stop strength
Placing the switch such that the direction of
switch operation is vertical, and
then a static load of 30N shall be applied in
the direction of stem operation
for a period of 1 min.
There shall be no sign
of damage
mechanically and
electrically.
2.6.7
Stem strength
Placing the switch such that the direction of
switch operation is vertical, and
then the maximum force to withstand a pull
applied opposite to the direction
of stem operation shall be measured.
20N.min.
3. DRAWING & DIMENSION:
PARTS LIST:
Item
Components
Material
1
Terminal
BRASS Silver plating
2
Case
PPA Black
3
Contact
SUS301 Contact side silver plating
4
Cover
BRASS CuSn plating
5
Stem
PPA Black
Returned plastic should not exceed 20%.