SW13-DPL-02(R)-T 2Pins Cabriole leg Switch DIP Switch Piano Push Switch

Series:SW13-DPL-02(R)-T

Description:

DETAIL SPECIFICATIONS:

Type: SW13-DPL-02(R)-T

Operation method: DIP Switch

Comply with: ■IP40  □IP65  □IP67  □IP68

Rating: DC 50V 0.3A

Contact Now

  • Applications
  • Technical parameters
  • Remarks

1.Digital Products: digital camera, digital video and so on;   

2.Remote Control: the remote control of automobile domestic security products;   

3.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;  
                                             
4.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ,refrigerator,washer;air-conditioning and so on;   
                                                                              
5.Security Products: visual interphone, monitor and so on;   
                      
6.Toys: electric toys and so on;   

7.Computer Products: PC camera and so on;   

8.Exercises Machines: treadmills, massage armchair and so on;                                                                    

9.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
      
10.Others:  laser pen ,Pointer,Wireless mouse remote control pen,Laser projection pen,page turner,electronic pen;MousePen;overhead projector and so on;

11.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders,automotive sets, etc.

12.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine,  Music Instrument, etc.

1.1  GENERAL CHARACTERISTIC: 

1.1.1 Application   This specification is applied to DIP Switch used      for electronic equipment.

1.1.2 Operating temperature range          -20+ 70

 

1.1.3 Test conditions                        

Unless other                                                               specified. The atmospheric conditions for making measurements and tests are as follows:

Ambient temperature:                             5~35℃

Relative humidity:                                45~85%

Air pressure:                       86~106kPa (860~1060 mbar)

Should any doubt arise in judgment. tests shall be conducted at the following conditions.

Ambient temperature:                             20±2℃

Relative humidity:                                60~70%

Air pressure:                      86~106kPa (860~1060 mbar)

 

1.2 Appearance construction and dimension: 

1.2.1 Appearance       

      Switch shall have good finishing, and no rust crack or plating failures.

1.2.2 Construction and dimensions    

     Refer to individual product drawing.

1.3. ELECTRICAL SPECIFICATION 

NO.

Items

Test conditions

Criteria

1.3.1

Contact resistance

Shall be measured at 1KHz SMALL CURRENT(100 mA OR LESS) by voltage drop method after some operations without load.

Applied position: Between terminal and terminal

50mΩ MAX

1.3.2

Insulation resistance

Test voltage: 100VDC, measured after 60 ±5s

Applied position:

1)Between terminal and terminal

2)Between terminal and ground

100MΩ MIN

 

1.4. ENVIRONMENT RESISTANCE 

NO.

Items

Test conditions

Criteria

 

 

1.4.1

Low Temperature

After testing at -25±3℃ for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed.

Contact resistance(item 4.1):

200mΩ MAX

Insulation resistance (item 4.2):

50MΩ MIN

Voltage proof: (item 4.3)

No dielectric breakdown shall occur.

Operating characteristic (item 5.1):

Operating characteristic variety Within ±10% of specified value .

No abnormalities shall be recognized in appearance and construction.

 

 

 

1.4.2

High Temperature

After testing at 85±2℃ for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h.

1.4.3

Steady Damp-heat

After testing at 40±2℃ and 90-95%RH for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed.

1.4.4

Change of

temperature

After 5 cycles of following conditions the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed.

1.4.5

Salt mist

he switch  shall be checked after following test:

1)  Temperature: 35℃±2℃

2)  Salt solution : 5±1%(solids by mass)

1) Time: 24±1 hour

After testsalt deposit shall be removed by running water.

 

 

1.5. WELDING PERFORMANCE 

 

 

 

 

1.5.1

 

 

 

 

Solder ability

Switch test under such conditions and inspect after.

1Variable temperature range :235±5℃

2Dip time:3±0.5s;

 

The area of dip tin should capture the 95% impregnated area

 

1.5.2

 

Resistance to soldering heat

 

The switch will be inspect under such conditions below

Temperature and impregnated time

Trial measure

temperature(

Time(s

Slot welding method

260±5

5±1

Soldering method

350±5

3±0.5

 

 

All of the appearance, motor functions, electrical properties are no abnormal.  

 

1.6. MECHANICAL CHARACTERISTICS  

NO. 

Item 

Test Condition 

Criteria 

 

1.6.1

 

 Operration  Force

 

Lateral push

 

 

 

200gf MAX

 

1.6.2

 

Travel to Closure

In the horizontal direction switch handle

opration,with an equal to 2 times the thrust of the switch fromone position to the next gear, moving distance measuring handle. 

 

2mm±0.2mm

1.6.3

Stem Strength

And along the running direcition at apex handle (500g) on the strength test, time is 30 seconds.

 

 

1.7 . DURABILITY 

NO. 

Item 

Test Condition 

Criteria 

 

1.7.1

 

 Life Test

An actuator shall be with a thrust of no great than 1 times switch power to 10,000 cycles.

At a speed of 30 cycles for 1 minutes. 

 

 

1)Contact resistance(item 4.1):

200mΩ MAX

2) Life time:

3) 10,000 cycles

 

 

1.7.2

Stem Strength

And along the running direcition at apex handle (500g) on the strength test, time is 30 seconds.

 

 

2. DRAWING & DIMENSION: 

5. PACKING: 

5.1

 Packing material:

 

Tube

5.2

 Packing number:

 121 pieces per tube
 32 tubes per shipping carton
 Each shipping carton 3872 pieces

5.3

Weight:

 Gross Weight:   2.6kg

 Net Weight  :   2.4kg

5.4

Size:

550 x 380 x 260 CM

PARTS LIST: 

ITEM

 DESC.

MATERIALS

1

ACTUATOR

THERMOPLASTIC  PBT UL 94V-0

2

COVER

THERMOPLASTIC  PBT UL 94V-0

3

CONTACT

PHOSPHOR BRONZE

4

TERMINAL

BRONZE

5

BASE

THERMOPLASTIC  PBT UL 94V-0

return