SK-43D09-PG3SW-silde switch 2P6T

Series:SK-43D09-PG3SW

Description:

Type: SK-43D09-PG3SW

RATING:DC 50V 0.3A

FUNCTION:2P6T

Contact Now

  • Applications
  • Technical parameters
  • Remarks

1.Digital Products: digital camera, digital video and so on;   

2.Remote Control: the remote control of automobile domestic security products;   

3.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;  
                                             
4.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ,refrigerator,washer;air-conditioning and so on;   
                                                                              
5.Security Products: visual interphone, monitor and so on;   
                      
6.Toys: electric toys and so on;   

7.Computer Products: PC camera and so on;   

8.Exercises Machines: treadmills, massage armchair and so on;                                                                    

9.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
      
10.Others:  laser pen ,Pointer,Wireless mouse remote control pen,Laser projection pen,page turner,electronic pen;MousePen;overhead projector and so on;

11.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders,automotive sets, etc.

12.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine,  Music Instrument, etc.

1.DETAIL SPECIFICATIONS:

1.1 OPERATING CHARACTERISTICS

NO.

Items

Test conditions

Criteria

1.1.1

Actuating Force

Measurement shall be made at the nearest

Point of the component or at the point 3mm

From the tip of the actuator(KNOB)

250gf±100gf

1.1.2

Terminal Strength

A static load of (300gf) shall be applied characteristics shall to the terminal for 15 sec in any direction

Mechanical and electrical characteristics shall be satisfied without looseness of actuator

1.1.3

Displacement of actuator (KNOB)

A static load of 10N(1Kgf) shall be applied to the top the actuator(KNOB) and then

Displacement shall be measured to the direction of the arrow.

The lever shall have no serious deformation and function is normally.

1.2 GENERAL CHARACTERISTICS 

1.2.1 Application                This specification is applied to SK-43D Silde Switch used for electronic equipment.

1.2.2 Operating temperature range     -10℃ + 50℃

1.2.3 Test conditions                Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows  

Ambient temperature:                       5~35℃

Relative humidity:                           45~85%

Air pressure:                                    86~106kPa (860~1060 mbar)

1.3 Appearance construction and dimensions

1.3.1 Appearance                          Switch shall have good finishing, and no rust crack or plating failures.

1.3.2 Construction and dimensions  Refer to individual product drawing.

1.4. Electrical specifications

NO.

Items

Test conditions

Criteria

1.4.1

Contact resistance

Measured at 1KHz small current (100mA or less)

100mΩ MAX

1.4.2

Insulation resistance

Apply a voltage of 500V DC for 1 MIN.

To following portions after which measurement shall be made.

(1)Between body and terminal.

(2) Between terminals.

100MΩ MIN

1.4.3

Dielectric strength

AC 500V rms(50-60Hz) for 1 min trip

Current:0.5mA

(1) Between terminals.

(2) Between individual terminal and frame.

Without damage to parts arcing or breakdown etc

1.5. Environment Resistance

NO.

Items

Test conditions

Criteria

1.5.1

Cold

After testing at 0±2℃ for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed.

There shall be no deformation or cracks in molded part.

1.5.2

Dry heat

After testing at 85±2℃ for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h.

1.5.3

Damp heat

After testing at 40±2℃ and 90-95%RH for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed.

1.5.4

Change of

temperature

After 5 cycles of following conditions the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed.

1.6. WELDING CHARACTERISTICS

 

1.6.1

 

Solder ability test

The top of the terminals shall be dipped 2mm in the solder bath of 230±5℃ for 3±0.5 seconds.

The area of soldering should be over

75%

 

1.6.2

 

Resistance to soldering

Heat test

 

Soldering iron method:

Bit temperature 350±10℃

Application time of soldering iron 3±0.5 sec however excessive pressure shall not be applied to the terminal.

         

1.7.  ENDURANCE

NO.

Item

Test condition

Criteria

 

1.7.1

Life test

Without load :

An actuator shall be subject to 10,000 cycles at a speed of 15 to 18 cycles for 1 min.

Contact resistance

200mΩ MAX

Insulation resistance

50 mΩ MIN

Withstand voltage 500VAC, AC 500V, 1 minute.AC 500V 1 Operating force±30% Initial value. Without damage to parts arcing or breakdown etc.

2. DRAWING & DIMENSION:

3. CIRCUIT DIAGRAM:

1. PARTS LIST:

ITEM

PARTS

MATERIALS

QUANTITY

FINISH

1

KNOB

 POM

1

BLACK

2

FRAME

STEEL STRIP

1

NI PLATED

3

BASE

PHENOLIC RESIN

1

NATURAL

4

TERMINAL

BRASS STRIP

16

Ag PLATED

5

CONTACT CLIP

BRASS STRIP

4

Ag PLATED

6

SPRING PLATE

STEEL WIRE

1

NATURAL

 

 

 

 

 


 

 

 

 

 

 

2. PACKING:

2.1

Packing material:

Plastic bag
Double-layers paper carton

EPS

2.2

Packing number:

500 pieces per bag
1 bag per inner carton
10 inner cartons per shipping carton

Each shipping carton 5000 pieces        

2.3

Weight:

Gross Weight: 700g

Net Weight: 560g (500PCS)

2.4

Size:

X x X x X CM /XCBM


return