LA160-12AYSW-11 illuminated push button switch with 5 pins

Series:PB12 series

Description:

Type:                             LA160-12AYSW-11
Construction category:    D
Operation method:          Push button switch
Configuration:                 Single-Pole Double -Throw (SPDT)
Terminal form:                Solder Terminal
Protection:                     IP40

Contact Now

  • Applications
  • Technical parameters
  • Remarks

Enormous remote
controller and portable remote controller

Instrumentation
Medical equipment

Telecommunications and networking equipment
Computers & peripherals
Instrumentation and controls

Industrial electronic equipment
Industrial remote controller
Medical Equipment
Communication
Outdoor Controls

Public building, Home security, Business building, Industrial equipment…etc.

3.DETAIL SPECIFICATIONS:
Type:LA160-12AYSW-11
Construction category:D
Operation method:Push button switch
Configuration:Single-Pole Double -Throw (SPDT)
Terminal form:Solder Terminal
Protection:IP40
Ratings: 0.7A 110VAC; 0.5A 220VAC; 0.1A 220VDC
Withstand voltage: 1000VAC,1Min
3.1  General
3.1.1Application This specification is applied to LA160 Push button Switch used for electronic equipment.
3.1.2 Operating temperature range -20℃ to +55℃                                
3.1.3  Test conditions Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
Ambient temperature:15~35℃
Relative humidity:45~85%
Air pressure:86~106kPa (860~1060 mbar)
Should any doubt arise in judgment. tests shall be conducted at the following conditions.
Ambient temperature:20±2℃
Relative humidity:60~70%
Air pressure:86~106kPa (860~1060 mbar)
3.2Appearance construction and dimensions
3.2.1 Appearance Switch shall have good finishing, and no rust crack or plating failures.
3.2.2Construction and dimensions Refer to individual product drawing.

3.3. Electrical Characteristics

NO.

Items

Test conditions

3.3.1

Contact resistance

The contact resistance should be 50mΩ(Max).

3.3.2

Insulation resistance

It is measured with 500V DC 1minute should be 100MΩ(Min).

3.3.3

Dielectric strength

AC 2000V,1min.(before endurance test)

 AC 1500V,1min.(after endurance test)

 

3.4 Mechanical Characteristics

Item

Description

Test Conditions

1

Operating Force

300gf±100

2

Operating Life

The mechanical life all of 1000 000 cycles

3

Contact Spacing

Min. 3.0mm (IEC61058)

 

3.5Durability

NO.

Item

Test condition

Criteria

3.5.1

Endurance

(According to

 UL61058)

0.7A 110VAC; 0.5A 220VAC; 0.1A 220VDC

Switch shall be operated according to following sequence

(Test1~Test2)

 

Voltage

Current

Power factor

Operation rate

Number of operation

Test1

110V

0.7A

0.75-0.8

6-10

cycles/min

50cycles

Test2

110V

0.7A

0.75-0.8

6-10

cycles/min

6000cycles

Voltage proof(Cut-off current:0.5mA)

0.7A 110VAC; 0.5A 220VAC; 0.1A 220VDC

Switch shall be operated 100,000 cycles at 15-20 cycles/min.

Test voltages shall be applied for 1 min

Insulation resistance(item 4.2):

50MΩ MIN

Voltage proof:

Terminal and ground:1000VAC

No dielectric breakdown shall occur.

Operating characteristic (item 5.1):

Operating characteristic variety

Within ±20% of specifiedvalue .

6000 cycles temperature rise:45MAX;

10,000 cycles temperature rise:55 MAX;

 

No abnormalities shall be recognized in appearance and construction

3.5.2

Endurance

(According to EN61058-1

/IEC61058-1)

0.7A 110VAC; 0.5A 220VAC; 0.1A 220VDC

Switch shall be operated 100,000 cycles at 15~20 cycles/min

Voltage proof(Cut-off current:0.5mA)

Test voltages shall be applied for 1 min.

Insulation resistance(item 4.2):

50MΩ MIN

Voltage proof:

Terminal and terminal:750VAC

Terminal and ground:1500VAC

No dielectric breakdown shall occur.

Operating characteristic (item 5.1):

Operating characteristic variety

Within ±20% of specifiedvalue .

Temperature rise:55 MAX

No abnormalities shall be recognized in appearance and construction


3.6. SOLDERING
Solder ability and Resistance to sold heat according to IEC 68-2-20


4. DRAWING & DIMENSION:



5. PACKING:

5.1

 Packing material:

Plastic box /
Double-layers paper carton

5.2

 Packing number:

100 pieces per bag
6 bags per inner carton
4 inner cartons per shipping carton
Each shipping carton 2400 pieces

5.3

Weight:

Gross Weight:    kg

Net Weight:        kg

5.4

 Size:

57.0 x 26.0 x 32.0 CM / 0.045CBM

SAFETY APPROVAL & RATING:

Approved Rating

Mark

Reference No.

 

UL&CUL

 

 

VDE

 

0.7A 110VAC; 0.5A 220VAC; 0.1A 220VDC

CQC

2011010305454397

return