KW10-FZSW6P150-08 Mini Snap Action Switch with PCB Terminal / Hinge Lever

Series:KW10 series

Description:

Type:  KW10-FZSW6P150-08

Construction category:  D type

Operation method:  Snap Action

Configuration:     Single-Pole Double -Through (SPDT)

Terminal form:    PCB Terminal

Mounting:   via side mounting holes

Protection:     Comply with IP40

Contact Now

  • Applications
  • Technical parameters
  • Remarks

Widely used in home appliance, electronic equipment, automatic machine,
communication equipment, car electron, apparatus and instrument, electric motion tool etc.

Rice cooker
Slow cooker

Baby chair
CNC machine tools
Power generator
Test equipment
Elevator
Power tools
Air conditioner

Bathroom products
Vacuum cleaner
Kitchen products
Pass-through machine


 DETAIL SPECIFICATIONS:

Type:  KW10-FZSW6P150-08

Construction category:      D type

Operation method:         Snap Action

Configuration:     Single-Pole Double -Through (SPDT)

Terminal form:    PCB Terminal

 Mounting:   via side mounting holes

 Protection:     Comply with IP40 

1 OPERATING CHARACTERISTICS 

Characteristics

Units

Standards

Note

Actuating Force

N

0.36 Max

Original 0.36 max.

Release Force

N

0.05 Min

Original 0.05 Min

Free Position

mm

11.5 Max

Original 11.5

Operating Position

mm

8.6 ± 1.0

Original 8.6 ± 1.0

Note:
Actuating Force
The force required to move the actuator from the free to the operation position
Release Force
The force allowed the mechanism to reset actuator after operation
Free Position
The position of the actuator when no external force is applied
Operating Position
The position of the actuator when contact change-over take place
Movement Differential
The distance between operation and release position

3.2 General 

3.2.1 Application       This specification is applied to KW10 Micro Switch used for electronic equipment.

3.2.2 Operating Temperature range   0℃ +85℃

3.2.3 Test condition     Unless otherwise specified. The atmospheric conditions for making measurements                                                       

                                And tests are as follows:

                               Ambient temperature: 15~35℃

                               Relative humidity: 45~85%

                               Air pressure: 86~106kPa (860~1060 mbar)

                               Should any doubt arise in judgment. It shall be conducted at the following conditions.

                               Ambient Temperature: 20±2℃

                               Relative humidity: 60~70%

                               Air pressure: 86~106kPa (860~1060 mbar)

 

3.3 Appearance Construction and Dimension 

3.3.1 Appearance                 Switch shall have good finishing, and no rust crack or plating failures.

3.3.2construction and dimensions   Refer to individual product drawing.

3.4. Electrical Specifications 

NO.

Item

Test Condition

Criteria

3.4.1

Contact Resistance

Shall be measured at 1A,5V DC by voltage drop method after some operations

without load.

Applied position: Between terminal “C” and terminal “NO”.

50mΩ MAX

3.4.2

Insulation Resistance

Test voltage:500VDC, measured after 1 min ±5s

Applied Position: applied position:
1)Between terminal “C” and terminal “NO”

2)Between terminal and ground

100MΩ MIN

3.4.3

Voltage proof

Following test voltages shall be applied for 1 min.

1)Between terminal “C” and terminal “NO”:600VAC (50~60Hz)

2)Between terminal and ground: 1000V AC(50~60Hz)

No dielectric breakdown shall occur

3.5. Durability 

NO.

Item

Test Condition

Criteria

3.5.1

Cold

After testing at 0±2℃ for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed.

Contact resistance(item 4.1):

100mΩ MAX

Insulation resistance (item 4.2):

50MΩ MIN

Voltage proof: (item 4.3)

No dielectric breakdown shall occur.

Within 10% of specified
value .

No abnormalities shall be recognized in appearance and construction

 

3.5.2

Dry heat

After testing at55±2℃ for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h.

3.5.3

Damp Heat

After testing at 40±2℃ and 90-95%RH for 96 h, the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed.

3.5.4

Change of Temperature

After 5 cycles of following conditions the switch shall be allowed to stand under normal room temperature and humidity condition for 1h, and then measurement shall be made within 1 h. water drops shall be removed.

3.5.5

Salt Mist

Switch shall be checked after following lest.

1) Temperature: 35±2℃

2) Salt solution: 5±1% (solids by mass)

3) Duration: 24±1h

After test, salt deposit shall be removed in running water

 

No remarkable corrosion shall be recognized in metal part

3.6. Welding Performance 

 

3.6.1

 

Solder ability

Switch test under such conditions and inspect after.

1Variable temperature range :235±5℃

2Dip time:3±0.5s

 

The area of dip tin should capture the 95% impregnated area

 

3.6.2

 

Resistance to soldering heat

 

The switch will be inspect under such conditions below

        Temperature and impregnated time

Trial measure

temperature(

Time(s

Slot welding method

260±5

5±1

Soldering method

350±5

3±0.5

 

 

 

All of the appearance, motor functions, electrical properties are no abnormal.

3.7.  Durability 

NO. 

Item 

Test Condition 

Criteria 

 

3.7.1

 

Endurance

(According to

 UL1054)

0.1A 125V AC

Switch shall be operated according to following sequence

(Test1~Test2)

 

Voltage

Current

Power factor

Operation rate

Number of operation

Test1

125V

0.15A

0.75-0.8

6-10

cycles/min

50cycles

Test2

125V

0.1A

0.75-0.8

6-10

cycles/min

6000cycles

Temperature rise

Difference between the steady terminal temperature and ambient.

Voltage proof(Cut-off current:0.5mA)

Following test voltages shall be applied for 1 min

Between terminal “C” and “NO”: 600V AC(50-60Hz)

Between terminal and ground:1000VAC (50-60Hz)

 

Insulation resistance(item 4.2):

50MΩ MIN

Voltage proof:

Terminal and terminal:1000VAC

No dielectric breakdown shall occur.

 

Operating characteristic (item 5.1):

Within 20% of specified
value .

 

6000 cycles temperature rise: 30℃ MAX

10000cycles temperature rise: 55℃ MAX

No abnormalities shall be recognized in appearance and construction.

 

3.7.2

 

Endurance

(According to EN61058-1

/IEC61058-1)

0.1A 250VAC

Switch shall be operated 10,000 cycles at 15~20 cycles/min

 

Insulation resistance(item 4.2):

50MΩ MIN

Voltage proof:

Terminal and terminal:750VAC

Terminal and ground:750VAC

No dielectric breakdown shall occur.

Operating characteristic (item 5.1):

Within ±20% of specified
value .

Temperature rise:55℃ MAX

No abnormalities shall be recognized in appearance and construction

 

4. DRAWING & DIMENSION

5. CIRCUIT DIAGRAM

7.1

 Packing material:

Plastic box / 
Double-layers paper carton

7.2

 Packing number:

100 pieces per box 
4 inner cartons per shipping carton
Each shipping carton 10000 pieces

7.3

Weight:

Gross Weight:  8.5kg

 Net Weight:  7.0kg

7.4

 Size:

31.0 x 25.0 x 34.5 CM / 0.045CBM

SAFETY APPROVAL & RATING: 

Approved Rating

Mark

Reference No.

0.1A125VAC T850.1(0.05)A 125/250VAC0.1GPA 125/250VAC

0.1RA 125/250VAC40T85,1E4,50-60HzIP400.1A, 30 V dc

40T85,1E4, IP40

UL&CUL 

E176213

 

VDE 

 

  0.1(0.05)A250VAC

CQC 

CQC07002020246

 

NEMKO 

 

 

SEMKO 

 

 

FIMKO 

 

0.1(0.05)A, 125/250 VAC0.1 RA, 125/250 VAC0.1 A, 30 V d.c

40T85,1E4, 50-60Hz, IP40

DEMKO 

D-00719

  0.1(0.05)A250VAC

CE 

AN501823730001

   0.1(0.05)A250VAC

TUV 

R50060067

0.1(0.05)A, 125/250 VAC0.1 RA, 125/250 VAC0.1 A, 30 V d.c

40T85,1E4, 50-60Hz, IP40

ENEC 

ENEC-00182

    0.1(0.05)A250VAC  1E4 T85

EK 

SU02030-8001A

0.1(0.05)A, 125/250 VAC0.1 RA, 125/250 VAC0.1 A, 30 V d.c

40T85,1E4, 50-60Hz, IP40

CB 

DK-5190

 

 

PARTS LIST

NO.

QUANTITY

Item

Material

1

1

plunger

Engineering plastic White PBT

2

1

cover

Engineering plastic Black PBT

3

1

Moving piece

Beryllium alloy QBe2

4

1

support

The brass strip H65 Plate with silver

5

1

case

Engineering plastic White PBT

6

1

NC terminal

The brass strip H65 Plate with silver

7

1

contact

AgNi10Gold plated

8

1

NO terminal

Brass alloy H65,Silver plated

9

1

Arm

Stainless Steel

Note: Returned plastic should not exceed 20%.

return