KW10-CTSW6R150 Mini Snap Action Switch with Right-angle PCB Terminal

Series:KW10 series

Description:

Type:KW10-CTSW6-R150
Construction category:D type
Operation method:Snap Action
Configuration:Single-Pole Double -Throw (SPDT)
Terminal form:PCB Terminal
Mounting:via side mounting holes
Protection:Comply with IP40

Contact Now

  • Applications
  • Technical parameters
  • Remarks

Widely used in home appliance, electronic equipment, automatic machine,
communication equipment, car electron, apparatus and instrument, electric motion tool etc.

Rice cooker
Slow cooker

Baby chair
CNC machine tools
Power generator
Test equipment
Elevator
Power tools
Air conditioner

Bathroom products
Vacuum cleaner
Kitchen products
Pass-through machine


1.DETAIL SPECIFICATIONS
Type:KW10-CTSW6-R150
Construction category:D type
Operation method:Snap Action
Configuration:Single-Pole Double -Throw (SPDT)
Terminal form:PCB Terminal
Mounting:via side mounting holes
Protection:Comply with IP40
1.1OPERATING CHARACTERISTICS

Characteristics

Units

Standards

Note

Actuating Force

N

0.36N Max

Original 0.36max.

Free Position

mm

11.5 Max

Original 11.5 Max

Operating Position

mm

8.6 ± 1

Original 8.6 ± 1.

Note:
Actuating Force
The force required to move the actuator from the free to the operation position
Release Force
The force allowed the mechanism to reset actuator after operation
Free Position
The position of the actuator when no external force is applied
Operating Position
The position of the actuator when contact change-over take place
Movement Differential
The distance between operation and release position

1.2 General
1.2.1 Application This specification is applied to KW10 Micro Switch used for electronic equipment.
1.2.2 Operating Temperature range -40℃ ~ +85℃
1.2.3 Test condition Unless otherwise specified. The atmospheric conditions for making measurements And tests are as follows:
Ambient temperature: 15~35℃
Relative humidity: 45~85%
Air pressure: 86~106kPa (860~1060 mbar)
Should any doubt arise in judgment. It shall be conducted at the following conditions.
Ambient Temperature: 20±2℃
Relative humidity: 60~70%
Air pressure: 86~106kPa (860~1060 mbar)
1.3 Appearance Construction and Dimension
1.3.1 Appearance Switch shall have good finishing, and no rust crack or plating failures.
1.3.2construction and dimensions Refer to individual product drawing.
1.4. Electrical Specifications

NO.

Item

Test Condition

Criteria

1.4.1

Contact Resistance

Shall be measured at 1A,5V DC by voltage 

drop method after some operations 

without load.

Applied position: Between terminal 

“C” and terminal “NO”.

50mΩ MAX

1.4.2

Insulation Resistance

Test voltage:500VDC, measured 

after 1 min ±5s

Applied Position: applied position: 
1)Between terminal “C” and 

terminal “NO”

2)Between terminal and ground

100MΩ MIN

1.4.3

Voltage proof

Following test voltages shall 

be applied for 1 min.

1)Between terminal “C” and 

terminal “NO”:600VAC (50~60Hz)

2)Between terminal and 

ground: 1000V AC(50~60Hz)

No dielectric 

breakdown 

shall occur

1.5. Durability

NO.

Item

Test Condition

Criteria

1.5.1

Cold

After testing at -40±2℃ for 96 h,

 the switch shall be allowed to stand 

under normal room temperature

 and humidity condition for 1h, and 

then measurement shall be made

 within 1 h. water drops shall be

removed.

Contact resistance(item 4.1): 

100mΩ MAX

Insulation resistance (item 4.2):

50MΩ MIN

Voltage proof: (item 4.3)

No dielectric 

breakdown shall occur.

Within 10% of specified
value .

No abnormalities shall be 

recognized in appearance 

and construction

 

1.5.2

Dry heat

After testing at 85±2℃ for 96 h, 

the switch shall be allowed to stand 

under normal room temperature 

and humidity condition for 1h, and 

then measurement shall be made 

within 1 h.

1.5.3

Damp Heat

After testing at 40±2℃ and 

90-95%RH for 96 h, the switch shall be 

allowed to stand under normal 

room temperature and humidity 

condition for 1h, and then measurement 

shall be made within 1 h. 

water drops shall be removed.

1.5.4

Change of 

Temperature

After 5 cycles of following conditions 

the switch shall be allowed to 

stand under normal room temperature

 and humidity condition for 

1h, and then measurement shall be

 made within 1 h. water drops 

shall be removed.

1.5.5

Salt Mist

Switch shall be checked 

after following lest.

1) Temperature: 35±2℃

2) Salt solution: 5±1%

 (solids by mass)

3) Duration: 24±1h

After test, salt deposit shall be

 removed in running water

 

No remarkable corrosion

 shall be recognized

 in metal part

1.6. Welding Performance

 

1.6.1

 

Solder ability

Switch test under such conditions and inspect after. 

1Variable temperature range :235±5℃

2Dip time:3±0.5s

 

The area of dip tin should 

capture the 95% 

impregnated area

 

1.6.2

 

Resistance 

to soldering 

heat

 

The switch will be inspect under such conditions below

        Temperature and impregnated time

Trial measure

temperature(

Time(s

Slot welding method

260±5

5±1

Soldering method

350±5

3±0.5

 

 

 

All of the appearance, 

motor functions,

 electrical properties 

are no abnormal. 

1.7.  Durability

NO.

Item

Test Condition

Criteria

 

1.7.1

 

Endurance

(According to

 UL61058)


1A 125VAC

Switch shall be operated according to following sequence

(Test1~Test2)

 

Voltage

Current

Power

 Factor

Operation 

Rate

Operation

 Cycles

Test 1

125V

4.5A

0.75-0.8

6-10

Cycles/min

50

cycles

Test2

125V

3A

0.75-0.8

6-10

Cycles/min

10000

cycles

 

1GPA 125/250VAC

Operation Cycles:50,000 cycles

Operation Frequency:15~20 /min

Voltage proof:Test voltage shall be applied for 1 min

50~60Hz, Cut-off current:0.5mA)

 

 

Insulation 

resistance

(item 4.2):

50MΩ MIN

Voltage proof:

Terminal and 

terminal:1000VAC

No dielectric 

breakdown

shall occur.

 

Operating 

characteristic 

(item 5.1):

Within 20% of 

specified
value .

 

6000 cycles 

temperature rise: 

30℃ MAX

50000cycles 

temperature rise: 

55℃ MAX

No abnormalities 

shall be recognized 

in appearance and 

construction.

 

1.7.2

 

Endurance

(According to

 EN61058-1

/IEC61058-1)

1(0.5)A250VAC

1A, 30VDC

Operating Cycles:50,000 cycles 

Operation Frequency:15~20 cycles/m 3(0.5)A 250VAC 

Voltage proof:Test voltage shall be applied for 1 min

50~60Hz, Cut-off current:0.5mA)

 

 

Insulation 

resistance

(item 4.2): 

50MΩ MIN

Voltage proof:

Terminal and 

terminal:750VAC

Terminal and 

ground:1500VAC

No dielectric 

breakdown shall 

occur.

Operating 

characteristic 

(item 5.1):

Within ±20% 

of specified
value .

Temperature 

rise:55℃ MAX

No abnormalities

shall be recognized 

in appearance and 

construction

4. DRAWING & DIMENSION

5. CIRCUIT DIAGRAM

 

7.1

 Packing material:

Plastic box / 
Double-layers paper carton

7.2

 Packing number:

100 pieces per box 
4 inner cartons per shipping carton
Each shipping carton 10000 pieces

7.3

Weight:

Gross Weight:  8.5kg

 Net Weight:  7.0kg

7.4

 Size:

31.0 x 25.0 x 34.5 CM / 0.045CBM

 

Approved Rating

Mark

Reference No.

1A125VAC T85 1(0.5)A 125/250VAC 1GPA 125/250VAC 1RA 125/250VAC 40T85,1E4,50-60Hz IP40 1 A, 30 V dc 40T85,1E4, IP40

UL&CUL

E176213

 

VDE

 

1(0.5)A250VAC

CQC

CQC07002020246

 

NEMKO

 

 

SEMKO

 

 

FIMKO

 

1(0.5) A, 125/250 VAC 1 RA, 125/250VAC 1 A, 30 V d.c. 40T85, 1E4, 50-60Hz, IP40

DEMKO

D-00719

1(0.5)A250VAC

CE

AN50182373 0001

1(0.5)A250VAC

TUV

R50060067

1A125VAC T85 1(0.5)A 125/250VAC 1GPA 125/250VAC 1RA 125/250VAC 40T85,1E4,50-60Hz IP40 1 A, 30 V dc 40T85,1E4, IP40

ENEC

ENEC-00182

1(0.5)A250VAC 1E4 T85

EK

SU02030-8001A

1A125VAC T85 1(0.5)A 125/250VAC 1GPA 125/250VAC 1RA 125/250VAC 40T85,1E4,50-60Hz IP40 1 A, 30 V dc 40T85,1E4, IP40

CB

DK-5190

 

 

PARTS LIST

NO.

QUANTITY

Item

Material

1

1

plunger

Engineering plastic Black  PPS-hGR40/41(UL94V-0)

2

1

cover

Engineering plastic Black PBT(UL94V—0)

3

1

Moving piece

Beryllium bronze C1720 HM QSn6.5-0.1

4

1

support

The brass strip H65 Plate with silver

5

1

case

Engineering plastic Black PBT(UL94V—0)

6

1

NC terminal

The brass strip H65 Plate with silver

7

1

contact

AgNi10

8

1

NO terminal

AgNi10/Cu

9

1

Arm

Stainless Steel

Note: Returned plastic should not exceed 20%.

return