TS6035A-043B 2 pins PCB foot tact switch, 6X3.5mm height is 4.3mm, SMD SMT tactile push button switch

Series:TS6035A

Description:


2. DETAIL SPECIFICATIONS:
Type:                          TS6035A-043B
Operation method: Tact Action
Configuration:          Instrument with feeling feedback
Terminal form:          PCB type SMT type(□BRAID □NO BRAID)
Mounting:                  Soldering
Protection:                Comply with ■IP40   □IP65   □IP67   □IP68

Contact Now

  • Applications
  • Technical parameters
  • Remarks

1.Audio Products:MP3,MP4,DVD. Audio;  

2.Digital Products: digital camera, digital video and so on;   

3.Remote Control: the remote control of automobile domestic security products;   

4.Communication Products: mobile phone, vehicle-mounted phone, telephone set, building equipment, PDA and so on;  
                                             
5.Homehole appliances: TV set, microwave oven, electric rice cooker, electric fans ,refrigerator,washer;air-conditioning and so on;   
                                                                              
6.Security Products: visual interphone, monitor and so on;   
                      
7.Toys: electric toys and so on;   

8.Computer Products: PC camera and so on;   

9.Exercises Machines: treadmills, massage armchair and so on;                                                                    

10.Medical Device: sphygmomanometer, thermometer, hospital call system and so on;
      
11.Others:  laser pen ,Pointer,Wireless mouse remote control pen,Laser projection pen,page turner,electronic pen;MousePen;overhead projector and so on;

12.Operating switches in all types of electronic equipment such as audio devices, office devices, communication devices, measuring instruments, TVs, video recorders,automotive sets, etc.

13.Household appliances, electric force, telecommunications, machine tool, vessel, textile, printing, Mining machine,  Music Instrument, etc.

2.1 General
2.1.1 Application This specification is applied to TACT Switch used for electronic equipment.
2.1.2 Operating temperature range -20℃ ~ +70℃
2.1.3 Storage temperature -30℃ ~ +80℃     
2.1.4 Test conditions         
Ambient temperature 5~35℃
Relative humidity 45~85%
Air pressure  86~106kPa (860~1060 mbar)
If any doubt arise from the judgment, tests shall be conducted at the following conditions.
Ambient temperature: 20±2℃
Relative humidity60~70%
Air pressure 86~106kPa (860~1060 mbar)
2.2 Appearance construction and dimensions
2.2.1 Appearance Switch shall have good finishing, and no rust crack or plating failures.
2.2.2 Construction and dimensions   Refer to individual product drawing.

2.3. ELECTRICAL SPECIFICATION

NO.

Items

Test conditions

Criteria

2.3.1

Contact resistance

Shall be measured at 10mA 5VDC by 

voltage drop method after some

operations without load.

Applied position: Between terminal 

and terminal

50mΩ MAX

2.3.2

Insulation resistance

Test voltage:100VDC, measured after 

1 min ±5s

Applied position: 1)Between terminal 

and terminal 

2)Between terminal and ground

100MΩ MIN

2.3.3

Voltage proof

Following test voltages shall be 

applied for 1 min.

(Cut-off  current:0.5mA)

1)Between terminal and terminal :

250VAC (50~60Hz)

No dielectric breakdown

shall occur

2.3.4

Contact bounce

Lightly striking the center of the stem 

at a rate encountered in normal use

(3 to 4 times per second), and bounce shall be tested at “ON” 

and “OFF” 

ON-3msec.max

OFF-8msec.max

 

2.4. ENVIRONMENT RESISTANCE

NO.

Items

Test conditions

Criteria

2.4.1

Cold

After testing at -30±2℃ for 96 h, 

the switch shall be allowed to stand under

normal room temperature and humidity 

condition for 1h, and then 

measurement shall be made within 1 h. 

waterdrops shall be removed.

 

 

 

 

 

 

Contact resistance: 

200mΩ MAX

Insulation resistance:

50MΩ MIN

Voltage proof:

No dielectric 

breakdown 

shall occur.

Operating 

characteristic 

variety

Within ±10% of 

specified value .

2.4.2

Dry heat

After testing at 80±2℃ for 96 h, the switch 

shall be allowed to stand under

normal room temperature and humidity 

condition for 1h, and then

measurement shall be made within 1 h.

2.4.3

Damp heat

After testing at 60±2℃ and 90-95%RH 

for 96 h, the switch shall be allowed

to stand under normal room temperature 

and humidity condition for 1h,

and then measurement shall be made 

within 1 h. water drops shall be

removed.

2.4.4

Change of

temperature

After 20 cycles of following conditions 

the switch shall be allowed to stand

under normal room temperature and 

humidity condition for 1h, and then

measurement shall be made within 

1 h. water drops shall be removed.

 2.4.5

Sulfuration resistance

When endured a temperature of 40 

+ 2 DEG relative humidity of 90-95%

RH gas concentration, H2S: 3ppm + 

1ppm, 8 

hours after the test, the 

switch in normal temperature and 

humidity conditions 

to recover for

1 hours, then measuring in 1 hours.

To remove the gel. 

2.4.6

Salt mist

he switch  shall be checked after 

following test:

1)  Temperature: 35℃±2℃

2)  Salt solution : 5±1%(solids 

by mass)

1) Time: 8±1 hour

After test, salt deposit shall be 

removed by running water.

No abnormalities 

shall be recognized

in appearance and 

construction.

2.5. WELDING PERFORMANCE

 

2.5.1

 

Solder ability

Switch test under such conditions 

and inspect after. 

1Variable temperature range : 

245±5℃

2Dip time:2±0.5s

The area of dip tin 

should capture the

90% impregnated area

 

2.5.2

 

Resistance to

soldering heat

The switch will be inspect under 

such conditions below

Temperature and impregnated time

Trial measure

Temperature(℃)

Time(s)

Slot welding 

method

260±5

5±1

Soldering method

350±5

3±0.5

 

All of the appearance, 

motor functions,

electrical properties 

are no abnormal.  

2.6.  DURABILITY

 

2.6.1

 

Operation life

Measurement shall be made following

the test set forth below: DC 12V, 50 

mA resistance load;

Rate of operation:120 times/min.; 

Operating Force1.5OF; Average 

fault-free life: 100,000 cycles

Contact 

resistance:

≤200mΩ

 Contact 

bounce:  

≤10ms

Operating 

Force: 

initial value

±30%

 

2.6.2

 

Vibration

Measurement shall be made following 

the test set forth below:

1) Vibration frequency range: 10Hz to 

55Hz to 10Hz; 

2) Amplitude: 1.5mm; 

3) Direction of vibration: three mutually 

perpendicular direction including the 

direction of stem travel

4) Duration: Each 2hours.

2.6.3

Operation Force

The switch is placed perpendicular to the 

direction of the operation, gradually force 

in key top center

of switch, measure maximum intensity 

when it conducted required.

180±50gf

2.6.4

Over Travel

Switch at the vertical operating orientation 

placement, with a force equal to 2 times 

according to the

static load applied on the switch button 

the top center, measure the top moving 

distance

0.25±0.10mm

2.6.5

Resilience

The switch is placed perpendicular to the 

direction of the operation, the switch key 

top center fell to

a full stroke, the converted measurement 

from the top of the intensity of free position.

50gf.min.

2.6.6

Stop strength

The switch is placed perpendicular to the 

direction of the operation, the static load 

applied 30N from

the operation direction keys to continue 

1min.

no 

mechanism 

and

electricity 

damage

2.6.7

handle pull

out strength

The switch is placed perpendicular to the 

direction of the operation, applying tension 

on the keys

from the opposite direction of operation, 

measure the maximum tension when the 

key is pulled out.

20N.min.

3. DRAWING & DIMENSION:

PARTS LIST:

 

NO

  NAME

MATERIAL

1

1

Terminal

H65 silver plated brass

2

1

Case

PA66-G30 Black

3

1

Contact

F.Ag/C5210 Contact side silver plating

4

1

Cover

SPCCC-SD CuSn plating

5

1

Plunger

PA66-G30 Black

Returned plastic should not exceed 20%.

return